Eshop roka 2025 s vykurovacou technikou

Messinkitulppa 1/2"

Mã số: 2520055
Chưa được đánh giá Chi tiết đánh giá
1,82 € –32 %
Fiting Zátka mosadzná 1/2“
1,82 € –32 % 1,23 € / Cái 1 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
4–7 päivää

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Messinkinen mutteritulppa 1/2“

 - ulkoiselle kierteelle   

 

 

Messinkinen kierretiiviste – sulkee pysyvästi tai tilapäisesti käyttämättömän pään kierreputkesta tai -laitteesta. Messinki on pitkään testattu, standardi materiaali kierreputkistoille veden ja lämmityksen osalta sen korroosionkestävyyden ja luotettavan tiiveyden ansiosta, kun liitos on oikein kiristetty.

Usein kysyttyä

  • Miten valita oikea koko? Kierreruuvin mitta (esim. 1/2", 3/4", 1") on täsmättävä putken tai -laitteen kierreruuvin mitan kanssa, johon fitingi liitetään - FF (sisäinen-sisäinen), MF (ulkoinen-sisäinen) ja vastaavat lyhenteet nimessä ilmoittavat kierreruuvin tyypin fitingin kummallakin puolella.
  • Mitä FF ja MF lyhenteet tarkoittavat? F (female, sisäinen kierre) ja M (male, ulkoinen kierre) ilmoittavat kierreruuvin tyypin fitingin kyseisellä puolella - esimerkiksi "FF" tarkoittaa sisäistä kierreruuvia molemmilla puolilla, "MF" ulkoista toisella ja sisäistä toisella puolella.
  • Onko tiivisteen käyttö asennuksessa tarpeen? Kyllä, kierreruuviliitoksissa käytetään standardisti tiivistettä (esim. teflonipaperi tai hamppu tiivistyspastaa), jotta varmistetaan liitoksen täydellinen tiiveys - pelkkä kierre ei tiivisty luotettavasti ilman tiivistettä.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaiset kierreruuviliitokset onnistuvat perustaidoilla myös kotityöläiseltä, mutta jos toimitaan jo toimivassa putkistossa (erityisesti kaasu- tai painevesi-/lämmitysjärjestelmässä), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden asennuksen jälkeen.
  • Mikä materiaali ja mikä paineaste tämä fiting on? Valmistus on messinkiä, sopii tavallisiin veden ja lämmityksen putkistoihin - tarkat nimelliset paine- ja lämpötila-arvot (jos ne on ilmoitettu tietyssä tuotteessa) löytyvät teknisistä tiedoista yllä.

Các thông số bổ sung

Danh mục hàng: Tulpat
Bảo hành: 2 năm
Trọng lượng: 0.1 kg
Liittimen tyyppi: tulppa / kansi
Rozmer závitu: 1/2"
Materiaali: messinki
Typ pripojenia: «ulkoinen kierteitys»
Saatavuus: Varastossa tai toimittajalla

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

L avatar của tác giả 07.10.2026 12:19
Hey, my dad wants to cap off an old pipe and asked if this brass plug works for heating systems. Does it handle the heat up to 110°C and pressure of 1.5 MPa like we need?
A avatar của tác giả 07.10.2026 12:20
Yes, that brass plug is perfect for your heating setup since it handles temps up to 110°C and pressure up to 1.5 MPa. Just remember to use PTFE tape or hemp paste on the threads so it seals tight. It's a standard fit for most threaded pipes in the Plugs category.
R avatar của tác giả 19.01.2022 12:53
Dobrý deň, chcel by som sa spýtať, či v zátke pod závitom je dutina alebo je tam plný material. Na obrázku nevidieť požadovanú stranu zátky. Za odpoveď vopred ďakujem
A avatar của tác giả 19.01.2022 12:53
Žiaľ, neviem Vám na túto otáku odpovedať.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.