Eshop roka 2025 s vykurovacou technikou

1/2" - 20 mm jatko

Mã số: 2520037
Chưa được đánh giá Chi tiết đánh giá
2,70 € –13 %
Fiting Predĺženie 1/2" - 20 mm
2,70 € –13 % 2,34 € / Cái 1,90 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (47 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Mosadzinen kierrejatke 1/2" - 20 mm on yleisin liitos teräsputkistossa, esimerkiksi kattilan ja muiden lämmitysratkaisujen alla.

Mosaznen kierrejatke - jatkaa olemassa olevaa kierreliitäntää täsmälleen määritellyllä pituudella. Mosasi on pitkäaikaisesti testattu, vakiomateriaali kierreliitoksille veden ja lämmityksen putkistoissa sen korroosionkestävyyden ja luotettavan tiiviyden ansiosta, kun liitos on oikein kiristetty.

Usein kysyttyä

  • Miten valita oikea koko liittimelle? Kierrerakenteen (esim. 1/2", 3/4", 1") on vastattava tarkasti putken tai varusteen kierrerakennetta, johon liitin liitetään - FF (sisäinen-sisäinen), MF (ulkoinen-sisäinen) ja vastaavat lyhenteet nimessä osoittavat kierrerakenteen tyypin liittimen eri puolilla.
  • Mitä FF ja MF lyhenteet tarkoittavat nimessä? F (female, sisäinen kierre) ja M (male, ulkoinen kierre) osoittavat kierrerakenteen tyypin liittimen tietyssä osassa - esimerkiksi "FF" tarkoittaa sisäistä kierre molemmilla puolilla, "MF" ulkoinen toisella ja sisäinen toisella puolella.
  • Onko tiivistysmateriaalin käyttö asennuksessa tarpeen? Kyllä, kierreliitoksissa käytetään standardisti tiivistysmateriaalia (esim. teflonipaperi tai hamppu, jossa tiivistyspastaa), jotta varmistetaan liitoksen täydellinen tiiviys - pelkkä kierre ilman tiivistettä ei luotettavasti tiivistä.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaiset kierreliitokset onnistuvat perustaidoilla myös kotona, mutta jos toimitaan jo toimivassa putkistossa (erityisesti kaasu- tai painevesi-/lämmitysjärjestelmässä), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiviyden asennuksen jälkeen.
  • Mikä materiaali ja mikä paineasteikko tällä liittimellä on? Suorituskyky on messinkiä, sopii tavallisiin veden ja lämmityksen putkistoihin - tarkat nimellispainetta ja lämpötilaa koskevat arvot (jos ne on mainittu tietyssä tuotteessa) löytyvät teknisistä tiedoista yllä.

Các thông số bổ sung

Danh mục hàng: Laajennus 1/2
Bảo hành: 2 năm
Trọng lượng: 0.1 kg
Liittimen tyyppi: jatko
Kierteen koko: 1/2"
Materiaali: messinki
Liitäntätyyppi: sisäkierre × ulkokierre
Saatavuus: Varastossa tai toimittajalla

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 11.11.2026 12:39
Am o țevă de oțel cu filet 1/2" și vreau să prelungesc conexiunea sub centrala termică. Aceasta este extensia din bronz potrivită pentru asta?
A avatar của tác giả 11.11.2026 12:39
Da, exact aceasta este cea mai utilizată conexiune pentru încălzirea cu țevi de oțel sub centrală. Prolungarea filetată din bronz va prelungi conexiunea existentă cu lungimea exactă de 20 mm, fiind testată pe termen lung pentru etanșare sigură. Doar asigură-te că folosești material de etanșare (bandă sau cânepă cu pastă) la montaj.
E avatar của tác giả 12.10.2026 13:45
Hi there, I am writing to inquire whether this brass threaded extension is suitable for connecting a steel heating pipe in my boiler installation, and if the 1/2" thread designation ensures compatibility with standard fittings of the same size.
A avatar của tác giả 12.10.2026 13:45
Yes, this fitting is specifically designed as the most common connector for steel heating pipework under boilers and other installations. Since the thread size must exactly match your existing pipe or fitting, the 1/2" designation will work perfectly with any standard component of that same size. Just remember to use a sealing material like PTFE tape on the threads to ensure a reliable seal.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.