Eshop roka 2025 s vykurovacou technikou

PRESS T-kappale - PEX-putkelle - 17x1/2"Fx17 IVAR.T AC2

Mã số: 523337
Chưa được đánh giá Chi tiết đánh giá
11,40 € –20 %
Vykurovacia technika T-kus PRESS - pre potrubie PEX - 17x1/2"Fx17
11,40 € –20 % 9,12 € / Cái 7,41 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-KUS Press - IVAR.T AC2, putkikappale PEX-putkelle, koko: 17 x 1/2" x 17, pakkaus: 5/20/160 kpl

 

  • PN 10, T = +90 °C
  • PEX-putken Ø 17 x 2 mm saman halkaisijan liittämiseen ulkoiselle kierteelle
  • Materiaali pronssi CW617N

 

HUOMIO: Puristus tehdään TH17-työkalulla 1.5.2017 alkaen.

Usein kysyttyä

  • Mitä työkaluja tarvitsen tämän liittimen asentamiseen? Puristusliittimet vaativat erikoistyökalut oikean tyyppisellä puristuskalvolla (yleensä merkitty B, F tai TH järjestelmästä riippuen) sopivan koon ja tyypin liittimelle - ilman oikeaa työkalua liitosta ei voi muodostaa tai tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat puristusliittimet sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina tehtävä paineentarkistus koko järjestelmälle.
  • Voidaanko liitos purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin ruuviliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, puristusliittimien asentaminen vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksille, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: Puristusliittimet ja PEX-putkien liittimet
Bảo hành: 2 năm
Trọng lượng: 0.117 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:12:22

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 12.11.2026 12:30
Imam doma navadne cevi, pa ne vem če je to za tisto plastično cev kar se upogiba, in ali lahko to sam doma stisnem s kakšnimi kleščami, ki jih imam v garaži?
A avatar của tác giả 12.11.2026 12:30
To je fiting za PEX cevi, torej za tiste upogljive plastične cevi premera 17x2 mm, tako da ste pravilno pomislili. Žal pa z navadnimi kleščami ne gre - potrebujete posebno stiskalnico s čeljustmi TH17 (to je pomembno, saj je od 1.5.2017 v uporabi prav ta tip čeljusti), sicer se spoj sploh ne stisne pravilno. Ker gre za trajen spoj, ki ga kasneje ni mogoče razstaviti, priporočamo, da montažo prepustite inštalaterju, še posebej če bo cev zalita v steno ali estrih.
V avatar của tác giả 16.10.2026 20:51
Lep pozdrav, oče ima stiskalnico ampak ne vem če ima prave čeljusti za to. Rata not z navadnimi B čeljustmi al rabmo posebne, in od kdaj to velja?
A avatar của tác giả 16.10.2026 20:51
Lep pozdrav. Za ta T-kos (17x1/2"Fx17) se od 1. 5. 2017 naprej stiska izključno s čeljustmi tipa TH17, torej B čeljusti ne bodo delovale. Preveri pri očetu, kakšne čeljusti ima na stiskalnici, da ne bo nepotrebnih presenečenj na terenu.
M avatar của tác giả 01.10.2026 08:25
Zdravím, potrebujem na PEX potrubí 17mm urobiť odbočku na pripojenie radiátora s vonkajším závitom 1/2". Je toto T-kus vhodný aj na lisovanie bežnou lisovacou kliešťou (napr. TH profil), alebo treba špeciálne čeľuste?
A avatar của tác giả 01.10.2026 08:25
Zdravím, tento T-kus sa lisuje bežnými lisovacími kliešťami, len si treba overiť, či máte správny profil čeľustí podľa systému, ktorý používate (najčastejšie TH alebo U). Rozmery 17x1/2"Fx17 presne sedia na PEX 17mm s bočnou vnútornou vývodkou 1/2", takže na pripojenie radiátora je to v poriadku. Ak si nie ste istý typom čeľustí, pozrite sa aj na ostatné fitingy v tejto kategórii, kde je uvedená kompatibilita.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.