Eshop roka 2025 s vykurovacou technikou

Putkirei'itys DN 40 - DN 32 – TARJOUS PAW.RS 40-32

Mã số: 41610
Akcia
Chưa được đánh giá Chi tiết đánh giá
412,05 € –46 %
Vykurovacia technika Redukčná sada DN 40 - DN 32 - akcia
412,05 € –46 % 222,32 € / Cái 180,75 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

PAW.RS 40-32
 
  • PN 6, T = +110 °C
  • reduktiivinen asennuspaketti PAW-kiertovesipumpun tai PAW-lämmityskattilan moduulin DN 32 liittämiseksi PAW.MV-DN 40 -horisontaaliseen jakotukkiin
  • liitäntä DN 40 -liittimestä DN 32 -liittimeen (5/4“) 2“-kierteisellä laippamutterilla, jossa litteä tiiviste
  • liitäntäetäisyyden pienentäminen 160 mm:stä 125 mm:iin
  • asennuskorkeus 35 mm
  • materiaali pronssi

Usein kysytyt kysymykset

  • Mihin tätä mittauspakettia käytetään? Mittaus- ja lämmityspaketit mahdollistavat lämmön- tai vedenkulutuksen seurannan (ja asuintilojen mittaripaketeissa myös suhteellisen kustannusten jakamisen) tietyssä piirissä tai asunnossa.
  • Onko asennus ja lukeminen ammattilaisen suoritettava? Kyllä, mittauspaketin asennus sekä mahdollinen virallinen tarkastus/kalibrointi (laskutusmittauksessa) on suoritettava henkilöllä, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: Vähennyssarja DN 40 - DN 32
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 27.02.2026 1:07:07

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

O avatar của tác giả 28.10.2026 10:18
I'm helping my parents install this on their PAW.MV-DN 40 manifold, but will the connection height drop from 160mm down to 125mm fit their space?
A avatar của tác giả 28.10.2026 10:18
Yes, this kit is designed specifically to reduce that distance from 160 mm down to 125 mm. It connects the DN 40 flange to a DN 32 circulator pump or boiler module using brass parts and flat seals. The total installation height of the unit itself is just 35 mm.
M avatar của tác giả 22.09.2026 12:25
Chcem prepojiť potrubie DN 40 na DN 32 pri inštalácii obehovej pumpy. Je táto redukčná sada určená priamo na takéto použitie, alebo potrebujem ešte nejaké ďalšie tesnenia či spojky?
A avatar của tác giả 22.09.2026 12:25
Áno, táto sada je určená presne na redukciu z DN 40 na DN 32, takže by mala zodpovedať vášmu prípadu. Tesnenia väčšinou nie sú súčasťou balenia, odporúčame si ich zadovážiť zvlášť podľa typu spoja, ktorý používate. Ak si nie ste istý kompatibilitou s konkrétnou pumpou, radi poradíme na základe jej parametrov.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.