Eshop roka 2025 s vykurovacou technikou

Puserrusliitin - ALPEX - 18x2 ALU-EK IVAR.TA 4420

Mã số: 500685
Chưa được đánh giá Chi tiết đánh giá
5,79 € –20 %
Vykurovacia technika Zverné šróbenie- na viacvrstvové potrubie ALPEX - 18x2 ALU-EK
5,79 € –20 % 4,63 € / Cái 3,76 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (57 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puserrusliitin, IVAR.TA 4420, koko: 18 x 2 ALU - EK, pakkaus: 40 kpl pussia kohti / 320 kpl laatikkoa kohti
 - monikerroksiselle ALPEX-putkelle

 

  • PN 10, T = +120 °C
  • Eurokonus (EK) tai M 24 kierteet
  • materiaali pronssi CW617N, EPDM-tiiviste
  • kiinnitysmomentti 25 - 35 Nm
  • sopii ALPEX-putkelle

 

Oikean asentamisen varmistamiseksi seuraa näitä ohjeita:

1. Asenna puserrusliitin siinä järjestyksessä ja suunnassa kuin on esitetty seuraavissa kuvissa.

IVAR-ohje puristusliittimille

2. Aseta putki ja sopiva EPDM-tiiviste puristusliittimeen ja varmista, että kaikki on puhdasta ja tiivisteen O-rengas ei ole vaurioitunut.

3. Aseta mutteri kierteille ja kiristä käsin, lopulliseen kiristykseen käytä sopivaa kokoista avainta AC 670 / AC 671

Kumiosia ei saa missään tapauksessa voidella mineraalirasvoilla, EPDM-materiaalille tulee käyttää ainoastaan silikonipohjaista voiteluainetta.

Usein kysyttyä

  • Miten valitsen oikean kokoisen liittimen? Kierrerakenteen tulee täsmätä putken tai varusteen kierteisiin, johon liitin kiinnitetään - lyhenteet FF (sisä-sisä) ja MF (ulko-sisä) nimikkeessä osoittavat kierteiden tyypin eri puolilla.
  • Onko tiivisteaine tarpeen asennuksessa? Kierteitetyissä liitoksissa käytetään yleensä tefloniteippiä tai hamppukangasta tiivistemassalla, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennuksen suoritettava ammattilainen? Perusosaaminen riittää kotityöläiselle yksinkertaisessa kierteitetyssä liitoksessa, mutta jos joudutaan koskemaan jo toimivaan putkistoon (erityisesti kaasuputkistoon), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: Puserrusliitin monitasoiselle alpex-putkelle
Bảo hành: 2 năm
Trọng lượng: 0.062 kg
Liittimen tyyppi: liitin (kierreliitos)
Putken halkaisija: 18 mm
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:07:43

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.