Eshop roka 2025 s vykurovacou technikou

PRESS-GAS 90° - ulkoinen kierteitys - 3/4"Mx26 IVAR.PT 5711-GAS

Mã số: 511004GAS
Chưa được đánh giá Chi tiết đánh giá
15,25 € –20 %
Vykurovacia technika Koleno PRESS-GAS 90°  - závit vonkajší - 3/4"Mx26
15,25 € –20 % 12,20 € / Cái 9,92 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (5 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.PT 5711-GAS PRESS-GAS -kolmio 90°, IVAR.PT 5711-GAS, koko: 3/4" M x 26, pakkaus: 5 pussissa / 100 koko laatikossa
- ulkoinen kierre
 
  • maksimipaine PN 10, T = -20 °C - +60 °C
  • maksimikäyttöpaine PN 5
  • ALPEX-GAS -putken sisäiseen kierreeseen liitettäväksi
  • materiaali pronssi CW617N, tiiviste HNBR
  • yhteensopiva B-tyypin puristimien kanssa

 

Suositeltu käyttö PTN 704 05 mukaisesti

Usein kysyttyä

  • Mitä työkaluja tarvitsen tämän liittimen asentamiseen? Press-liittimet vaativat erikoistyökaluja, joissa on oikean tyyppinen leuka (yleensä merkitty B, F tai TH järjestelmän mukaan) sopivan koon ja tyypin liittimelle - ilman oikeaa työkalua liitosta ei voi tehdä eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaissa press-liittimissä on puristusindikaattori (esim. tiiviste O-rengas, joka vuotaa jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina tehtävä paineentarkastus koko järjestelmälle.
  • Voiko liitos avata sen jälkeen kun se on puristettu? Ei, toisin kuin ruuviliitoksessa, puristusliitos on pysyvä ja sen avaaminen edellyttää liittimen leikkaamista ja korvaamista uudella.
  • Onko asennuksen oltava ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysteknikolle/asentajalle tehtäväksi, erityisesti liitoksille, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: IVAR.PT 5711-GAS - polvenet - ulkokierre
Bảo hành: 2 năm
Trọng lượng: 0.148 kg
Kierteen koko: 3/4"
Tuotteen tyyppi: PRESS-liitin
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:10:17

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

I avatar của tác giả 05.11.2026 18:18
Bună ziua, o zi bună, doream să știu dacă acest colier de presiune 90° este compatibil cu țevi ALPEX-GAS și ce tip de cleme sunt necesare pentru montajul corect al conexiunii?
A avatar của tác giả 05.11.2026 18:18
Da, fitingul este conceput special pentru conectarea țevii ALPEX-GAS la un filet interior. Pentru montaj aveți nevoie neapărat de cleme specializate de presiune, de obicei marcate cu B, F sau TH în funcție de sistemul dumneavoastră. Fără aceste unelte specifice nu se poate realiza o conexiune sigură și verificată.
S avatar của tác giả 10.10.2026 22:12
Czy to koleno 3/4" da się połączyć z rurami ALPEX-GAS, bo słyszałem, że press nie działa ze zwykłym gwintem? I czy jak już je zaciśniecie, to można je odkręcić, jak coś pójdzie nie tak?
A avatar của tác giả 10.10.2026 22:12
Tak, ten model jest dedykowany do łączenia z rurami ALPEX-GAS i ma gwint zewnętrzny 3/4". Niestety po zaciśnięciu połączenie jest trwałe i nie da się go rozmontować – w razie błędu trzeba by przeciąć kształtkę. Pamiętaj też, żeby montaż zlecić fachowcowi, zwłaszcza jeśli rury mają być zabetonowane.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.