Eshop roka 2025 s vykurovacou technikou

PEX-putkistoon tarkoitettu puserrusliitin - 25x2,3 - 3/4"M IVAR.RP 731

Mã số: 501054
Chưa được đánh giá Chi tiết đánh giá
15,87 € –19 %
Vykurovacia technika Sada zverného šróbenia so vsuvkou - na potrubie PEX - 25x2,3 - 3/4"M
15,87 € –19 % 12,70 € / Cái 10,33 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (16 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puserrusliitin puserrusliitännällä, IVAR.RP 731, koko: 25 x 2,3 - 3/4" M, pakkaus: 25 kpl pussiin / 200 kpl laatikkoon
- PEX-putkille
 
  • PN 10, T = +120 °C
  • ulompi kierre 3/4” M
  • materiaali messinki CW617N

Usein kysytyt kysymykset

  • Miten valita oikea kokoinen liitin? Kierrerungon on vastattava tarkasti putken tai varusteen kierrerunkoon, johon liitin kiinnitetään - lyhenteet FF (sisä-sisä kierre) ja MF (ulko-sisä kierre) nimessä ilmoittavat kierretyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kierteitetyissä liitoksissa käytetään yleensä teflonnauhaa tai hamppukuitua tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus ammattilaisen tehtävä? Yksinkertaiset kierreliitännät onnistuvat perustaidoilla myös kotityöläiseltä, mutta jos joudutaan koskemaan jo toimivaan järjestelmään (erityisesti kaasujärjestelmään), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: Pex-putkille soveltuva puserrusliitinsetti jatkoholkilla
Bảo hành: 2 năm
Trọng lượng: 0.185 kg
Liittimen tyyppi: liitin (kierreliitos)
Putken halkaisija: 25 mm
Kierteen koko: 3/4"
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:10:53

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

T avatar của tác giả 24.10.2026 09:35
Imam PEX cev 25x2,3 in bi rad priklopil na razdelilec, ki ima 3/4" navoj - ali ta komplet ustreza tej kombinaciji, in ali rabim dodatno teflon trak ali konopno vlakno za tesnjenje navoja?
A avatar của tác giả 24.10.2026 09:35
Ja, ta komplet je točno za to dimenzijo - PEX cev 25x2,3 z zunanjim navojem 3/4" M. Za sam navojni spoj priporočamo teflonsko folijo ali konopno vlakno s tesnilno pasto, da zagotovite tesnost. Fiting je iz medenine CW617N, primeren za PN 10 in temperature do 120°C.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.