Eshop roka 2025 s vykurovacou technikou

Langaton IVAR.TER-PT-tilasensori GENESIS-säätimelle – dongle ja AA-paristot, musta

Mã số: IHP209018
Chưa được đánh giá Chi tiết đánh giá
179,58 € –20 %
Bezdrôtový priestorový snímač IVAR.TER-PT pre reguláciu GENESIS – dongle a batérie AA, čierny
179,58 € –20 % 143,66 € / Cái 116,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Langaton tilalämpötila-anturi

IVAR.TER-PT langaton versio mittaa huoneen lämpötilan ja lähettää tiedot langattomasti GENESIS-säätöön. Tämän säätimen IVARin mukaan on CALIBRA-, ATLAS-, ATHENA- ja MEGA-lämpöpumpuissa. Koska anturi ei tarvitse kaapelia, se sopii myös paikkoihin, joissa kaapelin vetäminen olisi vaikeaa, esimerkiksi jälkiasennuksissa.

Paketissa on langattomaan yhteyteen tarvittava dongle ja AA-paristot. Koodi IHP209018 tarkoittaa mustaa versiota; sama anturi on saatavana myös valkoisena versiona koodilla IHP209017.

Langattoman anturin yhdistäminen ja säätö GENESIS-säätimeen tulee jättää lämpöpumpun asentajalle.

Tekniset tiedot

KoodiIHP209018
MerkkiIVAR
TyyppiIVAR.TER-PT
Tuotelajilangaton tilalämpötila-anturi
SäätöGENESIS
Värimusta
Sisältöanturi, dongle, AA-paristot

Usein kysyttyä

Mihin säätimeen anturi on tarkoitettu?
GENESIS-säätimeen. IVARin mukaan sitä on CALIBRA-, ATLAS-, ATHENA- ja MEGA-lämpöpumpuissa.

Mitä pakkauksessa on?
Anturi, langattomaan yhteyteen tarvittava dongle ja AA-paristot.

Onko anturiin vedettävä kaapeli?
Ei. Se on langaton versio (Wireless) AA-paristoilla, joka kommunikoi säätimen kanssa donglen kautta.

Các thông số bổ sung

Danh mục hàng: IVAR.HP LEGEND, ATLAS, CALIBRA -sarjan lämpöpumppujen lisävarusteet
Bảo hành: 2 năm
Saatavuus: Varastossa tai toimittajalla
Koodi: IHP209018
Tavaramerkki: IVAR
Tavaramerkki (2): IVAR
Tuotelaji: langaton tilasensori
Säätö: GENESIS
Väri: musta
Sisältö: säädin, dongle, AA-paristot

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

Á avatar của tác giả 10.11.2026 15:48
Tisztelettel érdeklődöm, hogy amennyiben a CALIBRA hőszivattyúmhoz már rendelkezem a vezetékes kivitelű IVAR.TER-PT szabályozóval, lehetséges-e párhuzamosan telepíteni ezt a vezeték nélküli változatot egy másik helyiségben, vagy a GENESIS szabályozó csak egyféle kommunikációs móddal tud egyszerre üzemelni?
A avatar của tác giả 10.11.2026 15:48
Tisztelt Ákos! Ezt a kérdést sajnos a specifikáció nem fedi le pontosan, ez már a GENESIS szabályozó beállításaitól és a hőszivattyú-szerelő tapasztalatától függ, mivel a mérő párosítása és beállítása az ő feladata. Amit biztosan tudunk: ez a fekete, IHP209018 kódú mérő AA elemekkel és donggle-lel működik, kábel nélkül méri a szoba hőmérsékletét és küldi az adatot a GENESIS-nek. Javasoljuk, hogy a konkrét kombinációra vonatkozóan egyeztessen a szerelőjével, esetleg írjon nekünk e-mailt, hátha tudunk további segítséget nyújtani.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.