Eshop roka 2025 s vykurovacou technikou

Jakotukki jakotukki/keräilijä - ilman koteloa - 5/4"xEK; 3-tie; messinki IVAR.CS 553 D

Mã số: 400283
Chưa được đánh giá Chi tiết đánh giá
200,49 € –20 %
Vykurovacia technika Zostava rozdeľovač/zberač - bez skrine - 5/4"xEK; 3cestný; mosadz
200,49 € –20 % 160,39 € / Cái 130,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Jakotukki/jakotukki - ilman koteloa - 5/4"xEK; 3-tievä; pronssi

  • PN 10, T = +120 °C
  • sarja sisältää: jakotukin säätöruuveilla, jakotukin sulkuventtiileillä, kiinnityskonsolit
  • materiaali pronssi CW617N
    Huomio:
    Ennen kuin otat käyttöön lämmitysjärjestelmän, erityisesti
    lattialämmityksen ja patterilämmityksen yhdistelmässä,
    kehotamme voimakkaasti suorittamaan koko järjestelmän huuhtelun
    valmistajan ohjeiden mukaisesti. Suosittelemme käsittelyä lämmitysjärjestelmään
    valmisteella GEL.LONG LIFE 100. Myyjä ei ole vastuussa järjestelmän
    toiminnallisista vioista, jotka johtuvat järjestelmän epäpuhtauksista.

Usein kysyttyä

  • Miten valita oikea jakotukki/lisävaruste? Noudata tarvittavaa kierrosten määrää ja liitoskokoa - sen on vastattava pääsyöttöputken halkaisijaa lämmönlähteestä.
  • Onko asennus tehtävä ammattilaisen toimesta? Jakotukin ja sen lisävarusteiden asentaminen onnistuu myös taitavasta kotona tekijältä, suosittelemme kuitenkin lämmitysjärjestelmän liittämisen ja säätämisen jättämistä lämmitysteknikon tehtäväksi.

Các thông số bổ sung

Danh mục hàng: IVAR.CS 553 D - jakotukki ja keräin ilman runkoa
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 27.04.2026 3:20:56

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

T avatar của tác giả 09.11.2026 20:18
Good morning, I have a 5/4" main supply pipe from my boiler and need 3 circuits for underfloor heating - will this manifold set work directly with that pipe size, or do I need extra fittings?
A avatar của tác giả 09.11.2026 20:18
Good morning Tom, this set is made exactly for 5/4" connection on the main side with EK fittings, so it matches your supply pipe without any extra reducers. It's a 3-way version, so you'll have 3 circuits on the collector with shut-off valves included. Everything is brass (CW617N), rated PN 10 and up to 120°C, and comes without the cabinet. Just keep in mind, before putting it into operation we recommend flushing the whole system first, especially when combining underfloor and radiator heating.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.