Eshop roka 2025 s vykurovacou technikou

IVAR.BIG BLUE 4,5 × 20" 20 µm PP melt-blown - TARJOUS

Mã số: ESCPV452020ECO
Akcia
Chưa được đánh giá Chi tiết đánh giá
21,16 € –10 %
Filtračná vložka IVAR.BIG BLUE 4,5 × 20" – 20 µm, PP melt-blown – AKCIA
21,16 € –10 % 19,04 € / Cái 15,48 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Suodatin ESCPV452020ECO on vaihtokelpoinen suodatinelementti IVAR.BIG BLUE -suodattimeen ESFPV4520ECO, jonka koko on 4,5 × 20" ja liitos 1" F. Se on valmistettu 100 % polypropeenista melt-blown-tekniikalla ja se suodattaa hienoja mekaanisia epäpuhtauksia, kuten hiekkaa, ruostetta, mutaa ja sakkoja, 20 µm huokoisuudella.

  • koko 4,5 × 20", huokoisuus 20 µm
  • materiaali: 100 % polypropeeni (melt-blown)
  • kylmälle vedelle, jonka lämpötila on +5–+40 °C

Suodattimen elinikä riippuu veden laadusta ja käyttötiheydestä – yleensä se vaihdetaan 2–6 kuukauden välein tai mittarin mukaan. Valmistaja suosittelee vain alkuperäisiä suodatinelementtejä, sillä muiden valmistajien suodatinelementtien käyttö poistaa suodattimen takuun. Vaihdon yhteydessä sulje veden tulo, vapauta paine takana olevan hanan kautta, irrota säiliö avaimella, pese se ja tarkista O-rengas ennen kuin ruuvaat sen takaisin.

Tekniset tiedot

KoodiESCPV452020ECO
ValmistajaIVAR
TyyppiIVAR.BIG BLUE
Lajisuodatinelementti
Koko4,5 × 20"
Huokoisuus20 µm
Materiaali100 % polypropeeni (melt-blown)
Tarkoitussuodatin IVAR.BIG BLUE ESFPV4520ECO (1" F)
Veden lämpötila+5–+40 °C
Vaihtoväliyleensä 2–6 kuukautta

Usein kysyttyä

Mihin suodattimeen suodatin sopii?
IVAR.BIG BLUE -suodattimeen 4,5 × 20" liitos 1" F, koodi ESFPV4520ECO.

Kuinka usein suodatin on vaihdettava?
Veden laadusta riippuen yleensä 2–6 kuukauden välein. Suodattimen elinikä riippuu veden saastumisesta ja siitä, kuinka usein suodatinta käytetään.

Miten suodatin vaihdetaan?
Sulje veden tulo, vapauta paine takana olevan hanan kautta ja irrota säiliö asennusavaimella. Pese säiliö ja pää, aseta uusi suodatinelementti, aseta O-rengas uraan ja ruuvaa säiliö käsin.

Các thông số bổ sung

Danh mục hàng: suodatinpanokset - FP3, BIG
Bảo hành: 2 năm
Saatavuus: Varastossa tai toimittajalla
Koodi: ESCPV452020ECO
Valmistaja: IVAR
Tyyppi: IVAR.BIG BLUE
Laji: suodatinpatruuna
Mitta: 4,5 × 20" (114 × 508 mm)
Hienous: 20 µm
Materiaali: 100 % polypropyleeni (melt-blown)
Tarkoitus: IVAR.BIG BLUE ESFPV4520ECO (1" F) suodatin
Veden lämpötila: +5–+40 °C
Vaihtoväli: yleensä 2–6 kuukautta

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.