Eshop roka 2025 s vykurovacou technikou

Boiler Module MULTIMIX-C - Mixed - 3/4"Fx3/4"M IVAR.MUL-C 20 E

Mã số: 508156PE
Chưa được đánh giá Chi tiết đánh giá
977,85 € / Cái 795 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.MUL-C 20 E
 
  • PN 10, T = +120 °C
  • maksimivirtaus 1700 l/h, Kv 4,34 / 4,87
  • moduuli sisältää: syöttö- ja paluuputken, sekoitusventtiilin, elektronisen kiertojärjestelmän, tasapainotus BY-PASS toissijaiselle piireille, turvatunnistin, lämpötila-anturin haarautumiskohdan, takaiskuventtiilin, 2 kpl lämpömittareita ja täyttö-/ tyhjennyspalloventtiilin
  • BY-PASS säädettävä nimellisvirtausarvo Kv 0,27 - 6,50
  • turva-anturin katkaisulämpötila +60 °C
  • liitäntäkierre sisäinen - ulkoinen 3/4” F x 3/4” M
  • jakeluputken materiaali kupari, liittimet messinki CW617N, O-rengas EPDM

Ohjausmahdollisuudet:

  • termostaattisella päällä erillisellä upotetulla anturilla IVAR.T 5011U
  • elektronisella päällä IVAR.TE 3061 suhteellisella ohjauksella 0-10 V
  • elektronisella käyttömoottorilla IVAR.UNIMIX SSA 31 kolmiportaisella ohjausviestillä

Usein kysyttyä

  • Mihin tätä mittauspakettia käytetään? Mittaus- ja kattilalaitteistot mahdollistavat lämmön tai veden kulutuksen seurannan (ja asuntojen tapauksessa myös suhteellisen kustannusten jakamisen) tietyssä piirissä tai asunnossa.
  • Onko asennuksen ja lukemisen suoritettava ammattilainen? Kyllä, mittauspaketin asennus ja mahdollinen virallinen tarkastus/kalibrointi (laskutuksen mittauksessa) on suoritettava henkilöllä, jolla on asianmukaiset valtuudet.

Các thông số bổ sung

Danh mục hàng: MULTIMIX-C -sekoitusmoduuli
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:03:29

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 23.10.2026 10:17
Buongiorno a tutti, sto aiutando mio papà a scegliere questo modulo per la caldaia. Visto che ha le filettature 3/4" F x M e il termostato di sicurezza si spegne a +60°C, è compatibile con i nostri termosifoni esistenti o serve cambiare qualcosa?
A avatar của tác giả 23.10.2026 10:17
Ciao Angelo, grazie per la domanda precisa! Le specifiche indicano che le filettature sono già 3/4" F x M, quindi dovrebbe adattarsi ai tuoi collegamenti attuali senza modifiche strane. Il termostato di sicurezza a +60°C è un'ottima protezione integrata nel modulo stesso per evitare surriscaldamenti. Se hai dubbi su come montarlo, ti consiglio comunque di far controllare tutto da un tecnico qualificato come indicato nelle FAQ.
R avatar của tác giả 29.08.2026 15:54
Zdravím, chcel by som sa informovať, či je kotlový modul MULTIMIX-C v prevedení 3/4"Fx3/4"M kompatibilný s bežnými kondenzačnými kotlami, ktoré disponujú štandardnými 3/4" prípojkami, alebo je nutné použiť redukcie pre správne napojenie do existujúceho systému?
A avatar của tác giả 29.08.2026 15:54
Áno, pri štandardných 3/4" prípojkách na kotli by to malo sadnúť priamo bez redukcií – to je práve zmysel tohto prevedenia. Ak máte na kotli iný rozmer, vtedy by ste redukciu potrebovali, ale pri bežných kondenzačných kotloch to zvyčajne nie je potrebné.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.