Eshop roka 2025 s vykurovacou technikou

Asuinrakennuksen mittarikokoonpano - ilman koteloa - lämmitys Kv 2,75; ilman mittaria IVAR.EQM 25B

Mã số: 506381
Chưa được đánh giá Chi tiết đánh giá
691,26 € –20 %
Vykurovacia technika Bytová meracia zostava - bez skrine - vykurovanie Kv 2,75; bez merača
691,26 € –20 % 553,01 € / Cái 449,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Tilaustuote (1-2 viikkoa)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.EQM 25

  • PN 10, T = + 90 °C
  • modul IVAR.EQUIMETER asunnon mittarijärjestelmään lämpöenergian kulutuksen mittaamiseksi keskusjakelusta
  • sisältää: kolmitievyöhykekäyttöventtiilin, 2 kpl tasapainotusventtiilejä, lämpötila-anturin kammion, IVAR.WFM-lämpömittarin (MEGATRON 5), 2 kpl sulkuventtiilejä järjestelmän tasapainotukseen, suodattimen, 4 kpl palloventtiilejä 3/4” tulo- ja lähtöliitännöissä, asennuspohjan ja lämpöeristyksen
  • liitäntäkierre ulkoinen 3/4” M
  • materiaali pronssi CB753S

Huomio:

Ennen kuin otat lämmitysjärjestelmän käyttöön, erityisesti lattialämmityksen ja patterilämmityksen yhdistelmässä, suosittelemme lämpimästi koko järjestelmän huuhtelua valmistajan ohjeiden mukaisesti. Suosittelemme lämmitysjärjestelmän käsittelyä GEL.LONG LIFE 100 -valmisteella. Myyjä ei ole vastuussa järjestelmän epäpuhtauksista aiheutuvista toimintarikkoumista.

Usein kysyttyä

  • Kuinka voin tarkistaa, onko tämä tuote sopiva järjestelmääni? Vertaa kuvauksessa mainittuja mittoja, materiaaleja ja teknisiä parametreja järjestelmäsi vaatimuksiin. Epäselvyyksien ilmetessä ota meihin yhteyttä ja kuvaile järjestelmäsi tarkemmin.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaisempien osien asennus on mahdollista myös taitavan kotityöläisen toimesta, kaasu-, sähkö- tai painejakelujärjestelmiin liittyvissä toimenpiteissä suosittelemme aina ammattimaisen teknikon apua.

Các thông số bổ sung

Danh mục hàng: Asuntomittauskeskus - ilman asennusrasiaa IVAR.EQM
Materiaali: messinki CB753S Huomautus
Tyyppi: huoneistomittaussarja
Mäntäispaine: PN 10
Hinnan viimeisin päivitys: 13.04.2026 1:03:32

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 01.11.2026 22:12
Mes parents veulent remplacer le compteur de chauffage dans l'appart, c'est du 3/4" chez nous niveau raccords. Ça colle avec ce module ou faut un autre diamètre ?
A avatar của tác giả 01.11.2026 22:12
Oui, ça devrait correspondre : les 4 vannes à boisseau sphérique en entrée/sortie sont en 3/4", tout comme le raccord fileté extérieur. Le reste (vanne trois voies, robinets d'équilibrage, filtre, compteur IVAR.WFM) est déjà intégré dans l'ensemble. Si vous avez un doute sur l'installation existante, donnez-nous les détails par e-mail et on vérifie avec vous.
R avatar của tác giả 04.09.2026 19:09
Táto zostava má Kv 2,75 – hodí sa to pre byt s výkonom okolo 6 kW, alebo je to málo a treba vyšší Kv?
A avatar của tác giả 04.09.2026 19:09
Kv 2,75 je štandardná hodnota pre bežné bytové zostavy a pre byt s výkonom okolo 6 kW to väčšinou postačuje – závisí to však aj od tlakových pomerov v sústave. Ak máte vyšší výkon alebo väčší byt, odporúčame to konzultovať s projektantom alebo nás kontaktovať priamo, radi to s vami prejdeme.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.