Eshop roka 2025 s vykurovacou technikou

Anturi - nesteille ja ilmalle - NTC 10kOhm; 2Ax1 IVAR.STLD

Mã số: STLD01
Chưa được đánh giá Chi tiết đánh giá
25,34 € –20 %
Vykurovacia technika Snímač - pre kvapaliny a vzduch -  NTC 10kOhm; 2Ax1
25,34 € –20 % 20,27 € / Cái 16,48 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Anturi - nestemille ja ilmalle - 2Ax1; NTC 10kOhm

  • STLD01 - anturi nestemille ja ilmalle NTC 10 k0hm

Usein kysyttyä

  • Miten tarkistan yhteensopivuuden venttiilini/järjestelmäni kanssa? Vertaa liitostyyppiä (esim. kierteitys M30x1,5) ja syöttöjännitettä venttiilisi tai säätösi teknisiin tietoihin.
  • Onko asennus ja kytkentä tehtävä ammattilaisen toimesta? Mekaaninen asennus venttiiliin onnistuu myös kotityöläiseltä, mutta sähköinen kytkentä säätöön suosittelemme jättämään tarkistettavaksi sähköasentajalle tai lämmitysteknikolle.

Các thông số bổ sung

Danh mục hàng: Huonetermostaatit
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:02:12

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 11.11.2026 09:56
Ich plane den Einbau dieses Sensors an einer bestehenden Heizungsanlage und benötige eine Bestätigung, ob die mechanische Montage am Ventil von mir selbst durchgeführt werden kann oder ob zwingend ein Fachmann erforderlich ist. Zudem möchte ich wissen, welche spezifischen Anschlussparameter wie Gewinde oder Spannung bei der Prüfung der Kompatibilität mit meinem aktuellen Ventil zu beachten sind.
A avatar của tác giả 11.11.2026 09:56
Die mechanische Montage des Wandsensors STLD01 können Sie grundsätzlich auch als Heimwerker selbst vornehmen. Für die elektrische Verkabelung an die Regelung empfehlen wir jedoch dringend, einen Elektriker oder Heizungstechniker hinzuzuziehen, um die Sicherheit zu gewährleisten. Bei der Kompatibilitätsprüfung sollten Sie unbedingt den Anschlusstyp (z. B. Gewinde M30x1,5) sowie die Spannung mit den technischen Daten Ihres Ventils vergleichen.
D avatar của tác giả 17.10.2026 12:35
Dober dan, imam toplotno črpalko in bi rad zamenjal pokvarjen tipalo na povratnem vodu - ali ta senzor lahko uporabim tudi za merjenje temperature vode, ali je samo za zrak? Me zanima tudi, ali montažo lahko opravim sam.
A avatar của tác giả 17.10.2026 12:35
Dober dan, senzor STLD01 je namenjen prav obema namenoma - lahko ga uporabite za merjenje temperature tekočine ali zraka, saj gre za NTC tipalo z uporovnostjo 10 kOhm. Pred nakupom še preverite, da se ujema s priključkom in napajanjem vaše regulacije na toplotni črpalki. Mehansko vgradnjo lahko opravite sami, za električno priključitev na regulacijo pa priporočamo, da to preveri električar ali ogrevalni tehnik.
M avatar của tác giả 19.08.2026 10:51
Dobrý deň prajem, mám doma nejaký termostat a chcel by som vymeniť ten snímač čo meria teplotu, ale neviem či tento pasuje - ide o to že neviem ako zistím či je to ten správny, keďže to číslo 10kOhm mi nič nehovorí.
A avatar của tác giả 19.08.2026 10:51
Dobrý deň, to číslo 10kOhm je odpor snímača a práve podľa neho sa určuje kompatibilita - pozrite si návod k vášmu termostatu, tam by malo byť napísané aký typ NTC snímača vyžaduje. Ak tam nájdete hodnotu NTC 10kOhm, tak tento snímač bude fungovať. Snímač je univerzálny, takže ho možno použiť ako na meranie teploty vzduchu, tak aj kvapaliny.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.