Eshop roka 2025 s vykurovacou technikou

Aksiaalinen lämpömittari - 0 °C - +80 °C; Ø 40 mm; ilman säiliötä - jakotukkeille IVAR.TP 120 ABJ

Mã số: 500062
Chưa được đánh giá Chi tiết đánh giá
10,96 € –19 %
Vykurovacia technika Teplomer axiálny - 0 °C až  +80 °C; D 40mm; bez jímky - pre rozdeľovače
10,96 € –19 % 8,77 € / Cái 7,13 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Lämpömittari aksiaalinen - ilman säiliötä - jakotukkeihin, IVAR.TP 120 ABJ, koko: D 40 mm, pakkaus: 1 kpl

 

  • lämpötila-alue 0 °C - +80 °C
  • takaapäin liitettävä
  • halkaisija 40 mm ilman säiliötä
  • jakotukkeihin IVAR.CS

 

 

Usein kysyttyä

  • Miten valitsen oikean tyyppisen ja kokoisen venttiilin/armatuurin? Ohjaa nimellispainetta (PN) ja käyttölämpötilaa (T) teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä venttiili/armatuuri toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus suoritettava ammattilaisen toimesta? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: akselilämpömittarit
Bảo hành: 2 năm
Trọng lượng: 0.031 kg
EAN: 8595145919611
Tyyppi: lämpömittari
Liitäntätapa: aksiaalinen (takaliitäntä)
Mittarin halkaisija: enintään 50 mm
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:09:47

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

G avatar của tác giả 18.01.2022 10:11
Dobry den, hladam teplomer na radiator , ktory je bez prepojenia na rury. Co ja zhanam je okruhli a vzdau s magnetom sa prichytava na radiator. Vedeli by ste mi poradit? Dakujem
A avatar của tác giả 18.01.2022 10:12
Dobrý deň. Žiaľ takéto teplomery nemáme v ponuke. Pekný deň
V avatar của tác giả 18.01.2022 10:10
Zdravím Vás. Pozeral som na Vašej internetovej stránke ponuku axialnych teplomerov, nenašiel som taký aký potrebujem, ale možno som zle hľadal. Preto sa obraciam na Vás s otázkou, či by som u Vás mohol kúpiť kruhový teplomer do cca 150 stupňov Celzia (v krajnom prípade aj do 120), na zabudovanie do panelu s priemerom otvoru 51 mm. Potrebujem to do kávovaru, pôvodný teplomer prestal fungovať. Snímanie teploty vodného bojlera bolo pôvodne zasunutým valcovým čidlom do diery o priemere 6 mm, ale nevadilo by aj čidlo menšieho priemeru. Prosím o informáciu, či by som u Vás mohol kúpiť teplomer použiteľný ako náhrada toho pôvodného. Ďakujem za ochotu.
A avatar của tác giả 18.01.2022 10:11
Dobrý deň. Žiaľ, ale teplomer aký potrebujete v ponuke nemáme. Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.