Eshop roka 2025 s vykurovacou technikou

45° PRESS GAS Bend - Single Socket End - 54mm IVAR.IVN23 GAS

Mã số: IVNGAS23.54
Chưa được đánh giá Chi tiết đánh giá
50,92 € –19 %
Vykurovacia technika Oblúk 45° PRESS GAS - s jedným zásuvným koncom - 54mm
50,92 € –19 % 40,74 € / Cái 33,12 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

45° kaari PRESS GAS - yhdellä liitospäällä - 54 mm

Huomio: Press GAS 76,1, 88,9 ja 108 mm -liittimien mitat tilauksesta.

Usein kysyttyä

  • Mitä työkaluja tarvitsen liitososan asennukseen? Press-liittimet vaativat erikoistuneet puristuspihdit oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmän mukaan) vastaamaan liitososan kokoa ja tyyppiä - ilman oikeita työkaluja liitosta ei voi muodostaa eikä tarkistaa.
  • Mistä tiedän, että liitos on oikein puristettu? Laadukkaat press-liittimet sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina suoritettava järjestelmän paineentarkistus.
  • Voiko liitoksen purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liitososan leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, liitososien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysteknikon tai putkimiehen tehtäväksi, erityisesti liitoksissa, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN23 GAS - 45° kulmat MF PRESS GAS
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:05:45

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 27.08.2026 08:27
Ahoj, dovolím si opýtať sa, či je tento oblúk 45° PRESS GAS so zásuvným koncom 54mm kompatibilný so štandardnými PRESS GAS tvarovkami iných výrobcov, alebo je jeho použitie obmedzené výhradne na systém IVAR, nakoľko plánujem kombinovať tvarovky od viacerých dodávateľov v rámci jednej plynovej inštalácie.
A avatar của tác giả 27.08.2026 08:27
Tieto PRESS GAS tvarovky od IVAR sú navrhnuté pre lisovací systém PRESS GAS, takže kompatibilita závisí od toho, či ostatné tvarovky spĺňajú rovnaký štandard a rozmer 54mm. Odporúčame to pred montážou overiť u vášho inštalatéra alebo nás kontaktovať priamo – radšej si to poistite, keďže ide o plynové rozvody.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.