Eshop roka 2025 s vykurovacou technikou

3/4" kierteinen läpivienti muoviastialle, messinki – IVAR.PRISLUSENSTVI PN – TARJOUS IVAR.PRISLUSENSTVI PN

Mã số: ART.856SB020
Akcia
Chưa được đánh giá Chi tiết đánh giá
10,16 € –10 %
Závitová priechodka 3/4" pre plastové nádrže, mosadz – IVAR.PRISLUSENSTVI PN – AKCIA
10,16 € –10 % 9,14 € / Cái 7,43 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Säiliön seinään porattava kierteitys

Kierteitys ART.856SB020 koolla 3/4" asennetaan muovisen säiliön seinään ja luodaan siihen kierteitetty liitos. Siihen voidaan sitten liittää putki tai laite vastaavalla kierteellä.

Kierteitys on valmistettu messingistä. IVAR-valikoimassa se kuuluu muovisten astioiden lisävarusteisiin, joita käytetään esimerkiksi sadeveden keräämiseen.

Mitat sarjassa

Muovisten säiliöiden messinkiset kierteytykset toimitetaan kokoissa 3/4", 1", 5/4", 6/4" ja 2". Tämä kappale on 3/4" kokoinen, muut koot löytyvät koodien ART.856SB025 (1"), ART.856SB032 (5/4"), ART.866SB040 (6/4"), ART.856SB050 (2") alta.

Ennen asennusta tarkista, että kierteen koko vastaa putkea tai laitetta, jonka haluat liittää säiliöön.

Tekniset tiedot

KoodiART.856SB020
ValmistajaIVAR
TyyppiIVAR.LISäVARUSTEET PN
Tuotteen tyyppikierteitetty läpivienti muovipulloihin
Kierteen koko3/4"
Materiaalimessinki
Tarkoitusmuovisäiliöt ja -astiat
Muut koot sarjassa1", 5/4", 6/4", 2"
Mittayksikkökpl

Usein kysyttyä

Mihin 3/4" kierteitys sopii?
Se asennetaan muovisen säiliön seinään ja luodaan siihen 3/4" kierteitetty läpivienti. Siihen voidaan sitten liittää putki tai laite vastaavalla kierteellä.

Mitä kokoja IVAR-läpivienneistä on saatavilla?
Muovisäiliöiden messinkiset kierteytykset valmistetaan kokoissa 3/4", 1", 5/4", 6/4" ja 2". Valitse koko putken tai laitteen kierteen mukaan, jonka haluat liittää säiliöön.

Mikä materiaali läpivientiin on käytetty?
Läpivienti on messinkiä. IVAR-valikoimassa se kuuluu muovisten astioiden lisävarusteisiin.

Các thông số bổ sung

Danh mục hàng: Lisävarusteet muovisiin säiliöihin
Bảo hành: 24
Saatavuus: Varastossa tai toimittajalla
Koodi: ART.856SB020
Valmistaja: IVAR
Tyyppi: IVAR.PRISLUSENSTVI PN
Tuotelaji: kierre läpivienti muoviastialle
Kierteen koko: 3/4"
Materiaali: messinki
Kohde: muoviastiat ja -säiliöt
Muut koot sarjassa: 1"" 5/4"" 6/4"" 2"
Mitoitusyksikkö: kpl

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.