Eshop roka 2025 s vykurovacou technikou

W6-sarjan jousitoiminen väliholkki - DN 100; L=60 mm BRA.W6.020

Mã số: W6020100
Chưa được đánh giá Chi tiết đánh giá
328,41 € –20 %
Vykurovacia technika Medziprírubový spätný ventil pružinový - séria W6 - DN 100; L=60mm
328,41 € –20 % 262,73 € / Cái 213,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Pruukkuinen takaiskuventtiili - jousitettu, BRA.W6.020, koko: DN 100, pituus: 60 mm

 

  • maks. paine 16 bar
  • liitospuristimet PN 16/PN 10/PN 6 mukaan STN EN 1092-1
  • T = -10 °C - max. +100 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot, öljy- ja hiilivetyjohdot
  • materiaali: runko - valurauta GJL 250, levy ja poikkipalkki - ruostumaton teräs A351 CF8M, jousi - AISI 316, tiiviste - NBR
  • asennus kaikissa asennoissa
  • minimipainetta vastus 0,1 bar
  • avoin paine koon mukaan - katso tekninen esite
  • käyttö vedelle, joka sisältää jopa 50 % glykolia
  • ei sovellu höyryyn

Usein kysyttyä

  • Miten valita oikea laite- tai venttiilityyppi ja koko? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitännän koon on vastattava putken halkaisijaa.
  • Miten tämä laite tai venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisinkulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa tehdä ammattilaisella, koska ne ovat turvallisuustoimintoisia.

Các thông số bổ sung

Danh mục hàng: BRA.W6.020 - takaiskuventtiilit - jousikuormitteiset
Bảo hành: 2 năm
Trọng lượng: 3.238 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:12:13

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 15.11.2026 14:43
Ich brauche ein Ventil für meine Heizung, das 100mm groß ist und nicht zu viel Platz wegnimmt. Passt das hier rein und hält es auch bei kaltem Wasser oder Glykol?
A avatar của tác giả 15.11.2026 14:43
Das Ventil hat genau die Größe DN 100 und ist mit nur 60 mm Länge sehr kompakt eingebaut. Es eignet sich für Wasser bis zu einer Temperatur von +100 °C, darf aber nicht für Dampf verwendet werden. Achtung: Für Wasser mit Glykolzusatz ist diese Armatur leider nicht geeignet.
D avatar của tác giả 12.10.2026 22:30
Molim vas, da li je ovaj međuprizemni ventil od nehrđajućeg čelika A351 CF8M prikladan za sustav grijanja koji koristi vodu s dodanim glikolom u koncentraciji do 50 posto?
A avatar của tác giả 12.10.2026 22:30
Da, taj model je namijenjen upravo za takve uvjete jer se može koristiti za vodu s sadržajem do 50% glikola. Materijal tijela je litvani GJL 250, dok su disk i šipka izrađeni od nehrđajućeg čelika A351 CF8M što osigurava otpornost. Ako vam treba rješenje za druge medije poput pare, morate znati da ova armatura nije predviđena za tu primjenu.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.