Eshop roka 2025 s vykurovacou technikou

Nippa - 5/4"x5/4" IVAR.1552 G

Mã số: 1552G000707
Đánh giá trung bình của sản phẩm là 5,0 trên 5 sao. 1 đánh giá Chi tiết đánh giá
10,64 € –20 %
Vykurovacia technika Vsuvka - 5/4"x5/4"
10,64 € –20 % 8,51 € / Cái 6,92 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Liitos, IVAR.1552 G, koko: 5/4" x 5/4", pakkaus: 15 kpl pussiin / 120 kpl laatikossa

 

  • PN 10, T = +120 °C
  • materiaali messinki CW617N
  • ATEST juomavedelle (RÚVZ Poprad)

Usein kysyttyä

  • Miten valita oikea kokoinen liitos? Kierrerungon tulee täsmätä putken tai varusteen kierrerungon kanssa, johon liitos kiinnitetään - lyhenteet FF (sisä-sisäkierre) ja MF (ulko-sisäkierre) nimessä ilmoittavat kierretyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kyllä, kierreliitoksiin käytetään standardisti teflonnauhaa tai hamppukangasta tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiviys.
  • Onko asennus ammattilaisen suoritettava? Yksinkertaisen kierreliitoksen voi tehdä myös kotimestari perustaidoilla, mutta jos tehdään toimivaan järjestelmään (erityisesti kaasujärjestelmään) liittyvä muutos, suosittelemme ottamaan yhteyttä asentajiin, jotka myös varmistavat liitoksen tiiviyden.

Các thông số bổ sung

Danh mục hàng: Tulpät, alennetut tulpät
Bảo hành: 2 năm
Trọng lượng: 0.1 kg
Liittimen tyyppi: nippa
Kierteen koko: 5/4"
Liitäntätyyppi: ulkokierre
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:11:33

Đánh giá sản phẩm

Đánh giá trung bình của sản phẩm là 5,0 trên 5 sao. 1 đánh giá
5
1x
4
0x
3
0x
2
0x
1
0x

Để lại đánh giá

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Danh sách các đánh giá

5
I avatar của tác giả Đánh giá sản phẩm là 5 trên 5 sao. 19.11.2021
Rýchle vybavenie objednávok , nakoľko som už kupoval viac x v tomto eshope, dodanie maximálne ne do 2 dní. Maximálna spokojnosť.
DS avatar của tác giả Dorota Sugarova Người quản lý 23.11.2021
Sme radi, že ste spokojný.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

B avatar của tác giả 08.10.2026 09:25
J'ai un tuyau en 5/4 et je veux savoir si ce mamelon IVAR va coller dessus, c'est pour de l'eau chaude à la maison. Il faut que je mette du ruban téflon ou autre pour que ça ne fuit pas ?
A avatar của tác giả 08.10.2026 09:25
Oui, le raccord est bien en 5/4 x 5/4 donc il correspond exactement à ton tuyau. Pour être sûr qu'il n'y ait pas de fuite, tu peux utiliser du ruban téflon ou du coton avec une pâte étanchéante comme conseillé pour les filetages. C'est du laiton CW617N adapté pour l'eau potable jusqu'à +120°C.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.