Eshop roka 2025 s vykurovacou technikou

Varoventtiili lämmitykseen - 1"Fx5/4"F; 3bar IVAR.PV 527

Mã số: 527630
Chưa được đánh giá Chi tiết đánh giá
132,84 € –20 %
Vykurovacia technika Poistný ventil pre kúrenie - 1"Fx5/4"F; 3bar
132,84 € –20 % 106,27 € / Cái 86,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Varoventtiili lämmitykseen, IVAR.PV 527, koko: 1" F x 5/4" F, paine: 3 bar

 

  • PN 10, T = +5 °C - +110 °C
  • toimii avauspaineella välillä 2,5 - 8 bar
  • materiaali messinki CB753S

Các thông số bổ sung

Danh mục hàng: IVAR.PV 527 - lämmitykseen
Bảo hành: 2 năm
Trọng lượng: 1.256 kg
EAN: 8016615013184
Kierteen koko: 1", 5/4"
Avautumispaine: 3 bar
Venttiilin käyttökohde: lämmitys
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 19.06.2026 8:37:22

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

G avatar của tác giả 17.11.2026 18:33
Ho una caldaia con mandata da 1" e devo collegare la valvola a un collettore con attacco da 5/4". Questa valvola copre entrambe le misure o devo comunque usare una riduzione? Inoltre la pressione di taratura a 3 bar è fissa o regolabile in caso servisse un valore diverso?
A avatar của tác giả 17.11.2026 18:33
La IVAR.PV 527 ha proprio attacco 1" F da un lato e 5/4" F dall'altro, quindi si collega direttamente senza bisogno di riduzioni tra le due misure. La pressione è tarata a 3 bar PN 10 e non è regolabile dall'utente: viene fornita con sovrappressione di apertura tra 2,5 e 8 bar, quindi se ti serve una taratura diversa da 3 bar devi orientarti su un altro modello della stessa serie. Il corpo è in ottone CB753S e funziona nel range di temperatura da +5°C a +110°C, adatto quindi al tuo impianto di riscaldamento.
V avatar của tác giả 30.10.2026 20:48
Na jaký otevírací přetlak je ventil nastavený z výroby? Potřebuju ho na kotel, kde chci mít jištění na 6 barů.
A avatar của tác giả 30.10.2026 20:48
Ventil se dodává s nastavitelným otevíracím přetlakem v rozsahu 2,5 až 8 bar, takže 6 barů je v pořádku. Nastavení je potřeba zkontrolovat/seřídit podle požadavků vašeho systému při montáži. Jinak je na 3 bar PN 10, rozměr 1" F x 5/4" F.
P avatar của tác giả 18.01.2022 09:15
Dobry den, Mam poistny ventil SYR, ktory mi tecie a potrebujem ho vymenit za identicky, aby som nemusel menit ostatne casti vodoinstalacie.. Vo vasom sortimente som nasiel ventily https://www.atria.sk/hladanie/?query=poistny+ventil , ale prosim mozete overit dostupnost venitulu znacky SYR (ktory bol sucastou dodavky boilery Tatramat).
A avatar của tác giả 18.01.2022 09:15
Dobrý deň. Je nám ľúto, ale takýto typ ventilu nemáme. S pozdravom
L avatar của tác giả 18.01.2022 09:14
Obraciame sa na Vás so žiadosťou na zaslanie cenovej ponuky na poistný ventil B35-10 Po 180kPa DN25 PV25A PN 6; 110°C
A avatar của tác giả 18.01.2022 09:15
Dobrý deň. Je nám ľúto, ale takéto typy ventilov nemáme. S pozdravom

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.