Eshop roka 2025 s vykurovacou technikou

Väliliitoslukkulaite kaasu - nikkelirauta levy; NBR - DN 80; L=46mm BRA.J9.101 GAS

Mã số: J9.101.080
Chưa được đánh giá Chi tiết đánh giá
154,98 € –20 %
Vykurovacia technika Medziprírubová uzatváracia klapka plyn - disk nikel. liatina; NBR - DN 80; L=46mm
154,98 € –20 % 123,98 € / Cái 100,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Putkiliitos sulkuhana PLYN, BRA.J9.101 GAS, koko: DN 80, pituus: 46 mm

 

  • maksimi paine 16 baaria, laippa PN16/PN10/PN6 standardin STN EN 1092-1 mukaan
  • T = -10 °C - +70 °C
  • kaasuille luokan G1 mukaisesti direktiivin 2014/68/EU mukaan, paineilma
  • materiaali: runko - valurauta GJS 400-15, levy - nikkelöity valurauta
  • tiiviste/liner materiaali: NBR
  • ei sovellu höyryyn

Usein kysyttyä

  • Miten valitsen oikean tyyppisen ja kokoisen laipan/hanan? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden tulee vastata tai ylittää järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko tulee vastata putken halkaisijaa.
  • Miten tämä laippa/hana toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, taaksepäin kulkeutuminen jne.) riippuu tietystä tyypistä - yksityiskohtainen kuvauks toiminnoista löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuhanaiden asentamisen voi tehdä myös kotitalousmestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenvähennysventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä ovat turvallisuustoimintoiset osat.

Các thông số bổ sung

Danh mục hàng: BRA.J9.101 GAS - läppäventtiilit KAASU
Bảo hành: 2 năm
Trọng lượng: 3.1 kg
Nimellishalkaisija (DN): DN 80
Venttiilin tyyppi: sulkuläppä
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:09:19

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 01.11.2026 08:00
Ahoj, můžu tuhle klapku použít i na rozvod technického plynu s teplotou kolem -5°C venku v zimě, nebo mi to těsnění NBR nevydrží? A jde o páru rozhodně zapomenout, že jo?
A avatar của tác giả 01.11.2026 08:00
Ahoj, -5°C není problém, klapka má rozsah -10°C až +70°C, takže venkovní zimní provoz v pohodě zvládne. Na páru ale skutečně zapomeň, těsnění NBR na ni vhodné není. Je určená pro plyny třídy G1 a stlačený vzduch, do 16 bar.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.