Eshop roka 2025 s vykurovacou technikou

Välikappale PRESS supistava - 20x32 IVAR.PT 5700 R

Mã số: 510023
Chưa được đánh giá Chi tiết đánh giá
13,90 € –20 %
Vykurovacia technika Vsuvka PRESS redukovaná - 20x32
13,90 € –20 % 11,12 € / Cái 9,04 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (3 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Välikappale press - supistava, IVAR.PT 5700 R, koko: 20 x 32, pakkaus: 5 pussissa / 100 koko laatikossa

 

Usein kysyttyä

  • Mitä työkaluja tarvitsen tämän putkiosan asennukseen? Puristusliittimet (press) vaativat erityiset puristuspihdit, joissa on oikeantyyppiset leuat (yleensä merkitty B, F tai TH järjestelmästä riippuen) ja jotka vastaavat putkiosan kokoa ja tyyppiä - ilman oikeita työkaluja liitosta ei voi tehdä eikä tarkastaa.
  • Mistä tiedän, että liitos on puristettu oikein? Laadukkaissa press-putkiosissa on puristuksen ilmaisin (esim. tiivistävä O-rengas, joka vuotaa, jos puristus jää kesken) - ennen seinään tai valuun peittämistä koko järjestelmälle on aina tehtävä painekoe.
  • Voiko liitoksen purkaa puristuksen jälkeen? Ei, toisin kuin ruuvattava (puserrus)liitos puristettu liitos on pysyvä, ja sen purkaminen edellyttää putkiosan katkaisemista ja uuden asentamista tilalle.
  • Täytyykö asennuksen tehdä ammattilaisen? Kyllä, putkiosien puristaminen vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme jättämään työn lämmitysasentajalle tai putkiasentajalle, erityisesti liitoksissa, jotka valetaan seinään tai lattiavaluun ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: PRESS-liittimet suorat redusoidut
Bảo hành: 2 năm
Trọng lượng: 0.162 kg
Liittimen tyyppi: nippa
Putken halkaisija: 20 mm, 32 mm
Liitäntätyyppi: puristusliitos
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:12:09

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

V avatar của tác giả 27.10.2026 12:49
Ahoj, beriem to na ALPEX potrubie 20mm a 32mm. Chcel by som sa opýtať, či stačia bežné lisovacie kliešte alebo treba nejaké špeciálne čeľuste? A dá sa ten spoj po zaliatí do steny vôbec rozobrať, ak niečo pôjde zle?
A avatar của tác giả 27.10.2026 12:49
Na montáž potrebuješ špecializované lisovacie kliešte so správnym typom čeľuste (B, F alebo TH), bez toho sa to nedá. Spoje sú trvalé, takže ak ich zaleješ do steny, pri chybe sa dajú len odrezať a dať nový fiting. Tento model je kompatibilný s čelustami typu B-F-TH a odporúčame ho dať inštalovať odborníkovi.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.