Eshop roka 2025 s vykurovacou technikou

Ulkoinen siirtymä - sisäinen kierteitys - 1/2"x1/2" IVAR.1551 G

Mã số: 1551G000404
Chưa được đánh giá Chi tiết đánh giá
2,52 € –19 %
Vykurovacia technika Prechod vonkajší - vnútorný závit - 1/2"x1/2"
2,52 € –19 % 2,02 € / Cái 1,64 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Ulkoinen - sisäpultti -liitin, IVAR.1551 G, koko: 1/2" x 1/2", pakkaus: 20 kpl pussiin / 320 kpl laatikossa

 

  • PN 10, T = +120 °C
  • materiaali messinki CW617N
  • ATEST juomavedelle (RÚVZ Poprad)

Usein kysyttyä

  • Miten valita oikea kokoinen liitin? Kierteen koko on oltava tarkalleen sama kuin putkessa tai laipassa, johon liitin kiinnitetään - lyhenteet FF (sisä-sisä) ja MF (ulko-sisä) nimessä ilmoittavat kierretyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kierteitetyissä liitoksissa käytetään yleensä teflontapeeta tai hamppukangasta tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus ammattilaisen tehtävä? Perusosaaminen riittää kotityöläiselle yksinkertaisten kierteitettyjen liitosten tekemiseen, mutta jos joudutaan tekemään muutoksia jo toimivaan järjestelmään (erityisesti kaasujärjestelmään), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitosten tiiveyden.

Các thông số bổ sung

Danh mục hàng: Ulkopuoliset - sisäpuoliset kierretulpat
Bảo hành: 2 năm
Trọng lượng: 0.038 kg
Liittimen tyyppi: siirtymäkappale
Kierteen koko: 1/2"
Liitäntätyyppi: sisäkierre × ulkokierre
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:05:08

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 23.10.2026 10:38
Lep pozdrav, ali je ta prehod primeren za vgradnjo na obstoječo napeljavo tople sanitarne vode, glede na to, da je navedena maksimalna temperatura 120°C? Zanima me tudi, ali je potrebno pri montaži uporabiti teflonski trak ali je dovolj samo konopno vlakno s pasto.
A avatar của tác giả 23.10.2026 10:38
Lep pozdrav, ja, ta prehod zdrži do 120°C, tako da je za toplo sanitarno vodo brez težav primeren. Za tesnjenje lahko uporabite eno ali drugo - torej teflonsko folijo ali konopno vlakno s tesnilno pasto, oboje standardno deluje za navojne spoje. Fiting je iz medenine CW617N in ima atest za pitno vodo, tako da je za to uporabo ustrezen.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.