Eshop roka 2025 s vykurovacou technikou

Turvapalopalo - jakotukki DN 20 - TARJOUS PAW.PS 5257

Mã số: 5257
Akcia
Chưa được đánh giá Chi tiết đánh giá
150,06 € –10 %
Vykurovacia technika Bezpečnostná poistná skupina -  pre horizontálny distribučný rozdeľovač DN 20  - akcia
150,06 € –10 % 135,05 € / Cái 109,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

PAW.PS 5257
  • varoventtiili 1/2” x 3/4”, 3 bar
  • mittarijännitys 0 - 4 bar
  • turvaventtiiliryhmä sisältää: T-kappale omalla tiivisteellä, varoventtiili, mittari
  • tehoon asti 50 kW

Usein kysyttyä

  • Mihin tämä mittarijoukko sopii? Mittari- ja kattilajoukot mahdollistavat lämmön tai veden kulutuksen seurannan (ja asuintilojen mittareiden tapauksessa myös suhteellisen kustannusten jakamisen) tietyssä piirissä tai asunnossa.
  • Onko asennus ja lukeminen suoritettava ammattilaisen toimesta? Kyllä, mittarijoukon asennus ja mahdollinen virallinen tarkastus/kalibrointi (laskutusmittauksen yhteydessä) on suoritettava henkilöllä, jolla on asianmukainen lupa.

Các thông số bổ sung

Danh mục hàng: Lisävarusteet
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 27.02.2026 1:07:28

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

K avatar của tác giả 12.11.2026 11:28
Szia, a 3 bar-os manométer és a biztonsági szelep együttesen elég-e egy 45 kW-os kazánhoz, vagy inkább a 50 kW határig kell nézni? A szülőknek csak ennyi van a rendszerben.
A avatar của tác giả 12.11.2026 11:28
Igen, ez a készlet kifejezetten 50 kW teljesítményig van méretezve, szóval a 45 kW-os kazánhoz tökéletesen megfelel. A benne lévő 3 bar-os szelep és a 0-4 bar-os mérő is pontosan ezt a tartományt fedi le, így nem kell aggódni. Ha esetleg nagyobb kapacitású készüléket terveznél később, akkor érdemes lenne megnézni a nagyobb teljesítményű csoportokat.
D avatar của tác giả 23.10.2026 21:24
Czy ta grupa do DN 20 wystarczy mi do kotła o mocy 50 kW i czy manometr pokaże ciśnienie powyżej 4 barów?
A avatar của tác giả 23.10.2026 21:24
Tak, zestaw jest dedykowany do mocy do 50 kW. Manometr ma zakres 0-4 bar, więc nie zmierzy wartości wyższych niż 4 bary. Całość zawiera zawór bezpieczeństwa na 3 bary oraz T-kształt z uszczelką.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.