Eshop roka 2025 s vykurovacou technikou

Turvallisuuskorkki - paineen mittaamiseen paisuntasäiliössä - 3/4" IVAR.5585

Mã số: 558510
Chưa được đánh giá Chi tiết đánh giá
61,99 € –20 %
Vykurovacia technika Bezpečnostný uzáver - k meraniu tlaku v expanznej nádobe - 3/4"
61,99 € –20 % 49,59 € / Cái 40,32 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Turvallisuusliitin - IVAR.5585, painekammion paineen mittaamiseen, paisuntasäiliölle, koko: 3/4"

 

  • PN 6, T = +85 °C
  • turvallisuusliittimen mukana tulee poistoventtiili ja sulkuventtiili
  • materiaali messinki CW617N

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/sulkuventtiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä venttiili/sulkuventtiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turva-venttiilien (turvallisuusventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: paisunta-astian sulkulaitteet
Bảo hành: 2 năm
Trọng lượng: 0.382 kg
EAN: 8016615055382
Tyyppi: pidike / kansi / tarvikkeet
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 19.06.2026 8:37:31

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 19.11.2026 21:42
Bă, avem un vas de expansiune pe centrală și tata vrea să monteze chestia asta ca să vadă presiunea. Dar merge montată de el sau chiar trebuie neapărat specialist? Și e ok pentru 3/4" cât avem noi pe conductă?
A avatar của tác giả 19.11.2026 21:42
Dimensiunea de 3/4" trebuie să corespundă cu diametrul conductei voastre, deci dacă aveți deja 3/4", e compatibil. Important însă - fiind o supapă de siguranță, cu rol de protecție pentru instalație, recomandăm montajul de către un specialist, nu e ca o armătură simplă de închidere. Ține cont și de parametrii ei: PN 6 și temperatură maximă 85°C, trebuie să se potrivească cu ce aveți în sistem.
D avatar của tác giả 20.10.2026 20:30
Mám na expanznej nádobe potrubie s priemerom 3/4" a systém beží do teploty 70 °C, či tento IVAR.5585 bezpečnostný uzáver vydrží a bude sedieť?
A avatar của tác giả 20.10.2026 20:30
Áno, tento uzáver má rozmer 3/4" a je určený pre teploty až +85 °C, takže vašim podmienkam úplne vyhovuje. Je vyrobený z mosadze CW617N a súčasťou je vypúšťací ventil aj uzatváracia armatúra. Pri montáži tohto bezpečnostného prvku však vždy odporúčame osloviť odborníka.
M avatar của tác giả 31.08.2026 16:44
Tato kúpil novú expanznú nádobu a chceme skontrolovať tlak, ale neviem či tento uzáver pasuje na bežné nádoby čo sa predávajú u vás. Je to nejaká špeciálna vec alebo to sedí na štandardné 3/4" závity?
A avatar của tác giả 31.08.2026 16:44
Tento uzáver má štandardný 3/4" závit, takže by mal pasovať na bežné expanzné nádoby s rovnakým závitom. Slúži práve na to, aby ste mohli pohodlne zmerať tlak v nádobe bez väčšieho rozobierania. Ak si nie ste istí závitom vašej nádoby, stačí to overiť v jej technickom liste.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.