Eshop roka 2025 s vykurovacou technikou

Termostatinen yksipisteventtiili - 1/2"xEK; suora IVAR.MJ PR

Mã số: IVA81610
Chưa được đánh giá Chi tiết đánh giá
88,07 € –20 %
Vykurovacia technika Termostatická jednobodová armatúra - 1/2"xEK; priama
88,07 € –20 % 70,46 € / Cái 57,28 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (3 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Termostatinen yksipisteventtiili - suora, IVAR.MJ PR, koko: 1/2" x EK, pakkaus: 1 pussia / 20 koko laatikossa
 
  • PN 10, T = +100 °C
  • yhden pisteen putkikattilan liittämiseen
  • liitettävä kupari- tai muoviputkeen IVAR.TR (kupari), TA (ALPEX) ja TP (muovi) puristusliittimillä
  • päähän liitettävä koko M 30 x 1,5
  • yhden putken / kahden putken järjestelmä
  • vaihteleva liittäminen tulo / paluu
  • materiaali nikkelöity messinki CW617N

Các thông số bổ sung

Danh mục hàng: Yksipisteinen hana
Bảo hành: 2 năm
Trọng lượng: 0.601 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:02:41

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

K avatar của tác giả 09.11.2026 20:39
Zanima me, ali je mogoče to termostatsko armaturo priključiti na obstoječo alpex cev, in sicer tako, da bo služila kot dovod, glede na to, da imam enocevni sistem priključitve radiatorja. Prav tako prosim za informacijo, ali gre pri priključku za glavo armature za standarden navoj M 30 x 1,5, saj želim preveriti ustreznost s termostatsko glavo, ki jo že imam.
A avatar của tác giả 09.11.2026 20:39
Pozdravljeni, da, armatura je primerna za enocevni sistem, priključitev na alpex cev pa se izvede z ustreznim navojnim priključkom IVAR.TA, ki ga je treba dokupiti posebej. Priključna velikost glave je res M 30 x 1,5, kar je standarden priključek, tako da bi vaša termostatska glava morala ustrezati. Ker gre za spremenljivo priključevanje dovod/povrat, armaturo lahko namestite glede na potrebe vaše inštalacije.
P avatar của tác giả 14.01.2022 16:02
Dobry den, hladame rebrik do kupelne, zatial mame zo steny vyvedene taketo pripojenie (privod vykur. vody + spiatocka). Co nam treba aby sme mohli vyhrievat radiator aj pomocou spiraly? Da sa spirala v tomto pripade napojit do tej istej "nohy" ako bude pripojena voda? Alebo musi byt na opacnej strane? Dakujem za radu
A avatar của tác giả 14.01.2022 16:03
Dobrý deň, budete potrebovať https://www.atria.sk/termostaticka-jednobodova-armatura-priama-1-2-x-ek/ Špirálu budete musieť zapojiť na opačnú stranu. Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.