TDC SMART BASIC -digitaalinen säädin aurinkojärjestelmille – IVAR.TDC, WiFi, 2× Pt1000
Mã số: S11205Mô tả chi tiết sản phẩm
Säätö TDC SMART BASIC (koodi S11205, tyyppi IVAR.TDC) ohjaa aurinkolämmitystä Pt1000-antureilla mitattujen lämpötilojen mukaan. Se tarjoaa 9 esiohjelmoitua hydraulista kaaviota, tšekkiläisen valikon ja oppaan, joka auttaa käynnistyksessä.
Ohjaus ja liittäminen
- 2,4" värillinen kosketusnäyttö TFT (240 × 320 pistettä) kapasitiivisella ohjauksella
- WiFi 2,4 GHz -yhteys internetiin (IEEE 802.11 b/g/n, WPA2/WPA3)
- SOREL Connect -sovelluksen kautta tapahtuva ohjaus ja etäkäyttö myös huollolle
Tulot ja lähdöt
- 3 Pt1000-antureille tarkoitettua tuloa, mittausalue -50 °C – 300 °C
- 1 mekaaninen kytkentärele (460 VA AC1 / 460 W AC3) 230 V -kiertovesipumpun ohjaukseen
- 1 0-10 V/PWM-lähdön ohjauspumppuun
- 2 Pt1000-lämpötila-anturia toimituksessa
Asennus
ABS-muovikuoressa (116 × 86 × 37 mm) oleva säädin asennetaan seinälle tai asennuskoteloon kuivaan tilaan, lämpötilassa 0–40 °C. Keräimen anturin kaapelin on oltava alle 30 m, muiden Pt1000-antureiden alle 10 m. Sähköliitännät ja käyttöönotto on suoritettava pätevän ammattilaisen toimesta.
Tekniset tiedot
| Koodi | S11205 |
| Merkki | IVAR |
| Tyyppi | IVAR.TDC |
| Syöttöjännite | 100–240 V AC, 50/60 Hz |
| Virrankulutus | 0,5–3 W (valmiustila 0,5 W) |
| Suojasulku | IP40 |
| Tulot | 3 × Pt1000 (-50 °C – 300 °C) |
| Lähdöt | 1 × 230 V -rele, 1 × 0-10 V/PWM |
| Näyttö | 2,4" värillinen kosketusnäyttö TFT |
| Liitäntä | WiFi 2,4 GHz, SOREL Connect -sovellus |
| Hydrauliset kaaviot | 9 |
| Anturit toimituksessa | 2 × Pt1000 |
| Mitat | 116 × 86 × 37 mm |
| Sisäinen sulake | 2 A hidas, 250 V |
Usein kysyttyä
Voidaanko säätimenä ohjata etänä?
Kyllä. Säädin liitetään internetiin WiFi:n kautta ja sitä ohjataan SOREL Connect -sovelluksella; etäkäyttö mahdollistaa myös huollon toimenpiteet.
Kuinka monta anturia on pakkauksessa ja kuinka monta voin liittää?
Toimituksessa on 2 Pt1000-anturia. Säätimessä on 3 Pt1000-antureille tarkoitettua tuloa.
Miten säädin ohjaa kiertovesipumppua?
230 V -kiertovesipumpun ohjaamiseen tarkoitetun 230 V -releen kautta. Ohjaussignaalia käyttäville pumpuille on lisäksi 0-10 V/PWM-lähdön.
Mitä on pakkauksessa säätimen lisäksi?
Kolme 3,5 × 35 mm ruuvia 8 kiinnikkeellä seinäkiinnitystä varten, 4 kiinnikettä kaapelin kuorman keventämiseen 8 ruuvilla, 2 A hidas vaihtoehtoinen sulake ja käyttöohje.
Các thông số bổ sung
| Danh mục hàng: | Pumppuyksiköt ja säätimet |
|---|---|
| Bảo hành: | 2 năm |
| Saatavuus: | Varastossa tai toimittajalla |
| Koodi: | S11205 |
| Tyyppi: | IVAR.TDC |
| Syöttöjännite: | 100–240 V AC, 50/60 Hz |
| Lähdöt: | 1 × rele 230 V, 1 × 0-10 V/PWM |
| Näyttö: | värillinen kosketus-TFT 2,4" |
| Liitäntä: | WiFi 2,4 GHz, SOREL Connect -sovellus |
| Mitat: | 116 × 86 × 37 mm |
| Sisäinen sulake: | 2 A hidas, 250 V |
| Merkki: | IVAR |
| Ottoteho: | 0,5–3 W (valmiustila 0,5 W) |
| Kotelointiluokka: | IP40 |
| Tulot: | 3 × Pt1000 (-50 °C – 300 °C) |
| Hydrauliikkakaaviot: | 9 |
| Toimitukseen kuuluvat anturit: | 2 × Pt1000 |
Đánh giá sản phẩm
Hãy là người đầu tiên đăng bài báo về mặt hàng này!
Thảo luận
Hãy là người đầu tiên đăng bài báo về mặt hàng này!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
