Eshop roka 2025 s vykurovacou technikou

Tasapainoventtiili - 5/4""; Kv 6,71 IVAR.CIM 787

Mã số: 787114
Chưa được đánh giá Chi tiết đánh giá
163,59 € –20 %
Vykurovacia technika Vyvažovací ventil - 5/4"; Kv 6,71
163,59 € –20 % 130,87 € / Cái 106,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.CIM 787 tasapainotusventtiili, koko: 5/4", Kv 6,71

 

  • PN 25, T = -10 °C - +120 °C
  • venttiili on tarkoitettu virtauksen tasapainotukseen lämmitys- ja jäähdytysjärjestelmissä
  • paine-erojen ja virtausten säätö mahdollisuudella lukita ja sulkea
  • venttiilin mukana tulevat kiinteät päätepisteet mittaamiseen ilman tyhjentämistä
  • materiaali messinki CW602N-M

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen laite/venttiili? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden tulee vastata tai ylittää järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus tehtävä ammattilaisella? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalon mestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä ovat turvallisuustoiminnot.

Các thông số bổ sung

Danh mục hàng: Tasapainotusventtiilit
Bảo hành: 2 năm
Trọng lượng: 0.938 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:04:00

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

E avatar của tác giả 09.11.2026 10:54
Desidererei gentilmente sapere se questa valvola di bilanciamento, essendo dotata di giunti fissi per il controllo, consenta effettivamente di eseguire la misurazione della portata senza dover procedere allo svuotamento della colonna montante. Inoltre, vorrei sapere se l'installazione possa essere eseguita autonomamente oppure se sia necessaria la presenza di un tecnico specializzato, trattandosi di una valvola con funzione di regolazione.
A avatar của tác giả 09.11.2026 10:54
Sì, i giunti fissi integrati servono proprio a questo: permettono di collegare lo strumento di misura e controllare il flusso senza bisogno di svuotare l'impianto. Per quanto riguarda il montaggio, trattandosi di una valvola di regolazione (bilanciamento della pressione differenziale e del flusso) e non di una semplice valvola di intercettazione, le consigliamo di farla installare da un tecnico specializzato. Se ha altri dubbi può sempre scriverci via e-mail.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.