Eshop roka 2025 s vykurovacou technikou

Takaiskuventtiili (kuula) - sērija 07 - 2 1/2""; L=198mm BRA.T7.100

Mã số: T7100065
Chưa được đánh giá Chi tiết đánh giá
218,94 € –20 %
Vykurovacia technika Závitová spätná klapka (gulôčka)- séria 07 - 2 1/2"; L=198mm
218,94 € –20 % 175,15 € / Cái 142,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puristusliitos takaiskuventtiili (pallo), BRA.T7.100, koko: 2 1/2", pituus: 198 mm

 

  • max. paine 16 bar, kierteet 1“ - 3“ F/F mukaan ISO 228-1
  • T = -10°C - max. +70 °C
  • jätevedelle, paksuille ja viskoosisille nesteille, maataloussovelluksiin
  • materiaali – runko, kansi: lieta GJS 400-15, pallo: teräs NBR-pinnoitteella
  • min. paine 0,2 bar
  • min. vastapaine 0,5 bar
  • ei sovellu höyrylle ja kaasuille

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus suoritettava ammattilaisen toimesta? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) asennuksessa suosittelemme aina ammattilaista, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: BRA.T7.100 - kierretakaiskuventtiilit (pallo)
Bảo hành: 2 năm
Trọng lượng: 6.372 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:07:25

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 28.10.2026 18:44
My dad is installing this 2 1/2" valve for a viscous liquid system, but I'm worried about the pressure limits. Can you confirm if it handles at least 0.5 bar of back-pressure and what the max operating temperature is?
A avatar của tác giả 28.10.2026 18:44
Yes, this valve works fine as long as your system stays between -10°C and +70°C, since it needs at least 0.5 bar of counter-pressure to close properly. It can handle up to 16 bar of pressure, so just make sure your setup doesn't go beyond those numbers. If you need something different for steam or gases, this specific cast iron model won't work.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.