Eshop roka 2025 s vykurovacou technikou

Takaiskuventtiili - sarja 06 ruostumaton teräs - ilman jousta - DN 125; L=29mm BRA.06.623

Mã số: I06623125
Chưa được đánh giá Chi tiết đánh giá
730,62 € –20 %
Vykurovacia technika Medziprírubová spätná klapka - séria 06 nerez - bez pružiny - DN 125; L=29mm
730,62 € –20 % 584,50 € / Cái 475,20 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Pystysuora välipuristinkytkentäinen takaiskuventtiili - BRA.06.623, koko: DN 125, pituus: 29 mm, ruostumaton teräs, jouseton

 

  • maksimi paine 25 bar
  • asennus välipuristimien väliin PN6 (vain DN 250 asti)/PN10/PN16 standardin STN EN 1092-1 mukaan
  • T = -20 °C - max. +200 °C
  • käyttö lämmityksessä ja ilmastoinnissa (HVAC), vesijohdoissa, paineilmassa, öljyissä ja hiilivedyissä
  • materiaali - runko, levy: ruostumaton teräs A351 CF8M, jousi: AISI 302, tiiviste: PTFE
  • sulkeutumiseen vaadittava minimipaine-ero 0,3 bar
  • käyttö veteen, jossa on enintään 50 % glykolia
  • ei sovellu höyryyn
  • JUOMAVESITODISTUS

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen laite/venttiili? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka tulee vastata tai ylittää järjestelmäsi todelliset käyttöolosuhteet, sekä liitoskokoa, joka vastaa putken halkaisijaa.
  • Miten tämä laite/venttiili toimii? Tarkka toiminnan periaate (sulkeminen, paineen säätö, taaksepäin suuntautuminen jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalon mestari, mutta säätö- ja turvalaitteiden (turvallisuusventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaisen apua, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: BRA.06.623, BRA.M6.623 PR - takaiskuventtiilit - vaakasuora ruostaton teräs
Bảo hành: 2 năm
Trọng lượng: 3.63 kg
Nimellishalkaisija (DN): DN 125
Venttiilin tyyppi: takaiskuläppä / -venttiili
Rungon materiaali: ruostumaton teräs
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:10:54

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.