Eshop roka 2025 s vykurovacou technikou

Takaiskuventtiili - sarja 05 - DN 100; L=170mm BRA.F5.000

Mã số: F5000100
Chưa được đánh giá Chi tiết đánh giá
514,14 € –20 %
Vykurovacia technika Spätný ventil prírubový - séria 05 - DN 100; L=170mm
514,14 € –20 % 411,31 € / Cái 334,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

 Takaiskuventtiili - pribruvová, BRA.F5.000, koko: DN 100, pituus: 170 mm

 

  • max. paine 16 bar, pribrut PN 16 mukaan STN EN 1092-1
  • T = -10 °C - max. +100 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot, paineilma, öljyt ja hiilivedyt
  • materiaali: runko - rauta, ohjain ja levy - messinki, tiiviste - NBR
  • asennus kaikissa asennoissa
  • minimi vastapaine: 0,1 bar
  • avauspaine riippuu asennosta - katso tekninen esite
  • käyttö vedelle, joka sisältää jopa 50 % glykoleja
  • ei sovellu höyrylle
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on vastattava putken halkaisijaa.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen oltava asiantuntija? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotona, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa antaa asiantuntijalle, koska ne ovat turvallisuustoimintoisia.

Các thông số bổ sung

Danh mục hàng: BRA.F5.000 - takaiskuventtiilit laippaliitännöin
Bảo hành: 2 năm
Trọng lượng: 12.6 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:11:04

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 08.10.2026 10:26
Tengo una tubería de 100 mm y no sé si esta válvula me servirá para mi calefacción sin que el agua se vaya al revés, ¿es muy difícil de poner yo sola o necesito llamar a un técnico?
A avatar của tác giả 08.10.2026 10:26
Sí, la medida DN 100 encaja con tu tubería y aguanta bien la presión hasta 16 bar. Como es una válvula de cierre sencilla, podrías montarla tú mismo si te sientes seguro, aunque siempre recomendamos pedir consejo si tienes dudas sobre la instalación.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.