Eshop roka 2025 s vykurovacou technikou

Takaiskuventtiili joustava - sarja W6; ruostumaton teräs - DN 25; L=21 mm BRA.W6.626

Mã số: W6626025
Chưa được đánh giá Chi tiết đánh giá
129,15 € –20 %
Vykurovacia technika Medziprírubový spätný ventil pružinový - séria W6; nerez - DN 25; L=21mm
129,15 € –20 % 103,32 € / Cái 84 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Pružinová takaiskuventtiili - väliholkki - BRA.W6.626, mitoitus: DN 25, pituus: 21 mm

  • maksimi paine 40 bar
  • välihihnat PN 16/PN 10/PN 6 mukaan STN EN 1092-1
  • T = -20 °C enintään +350 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot, pumppuasemat, öljyt ja hiilivedyt, kemianteollisuus
  • materiaali: runko, levy ja poikkipalkki - ruostumaton teräs A351 CF8M, tiiviste - metalli-metalli
  • asennus kaikissa asennoissa
  • minimipainetta vastus 0,1 bar
  • avauspaine koon mukaan – katso tekninen esite
  • käyttö vedelle, joka sisältää jopa 50 % glykoleja
  • JUOMAVESI ATEST

Usein kysyttyä

  • Miten valita oikea laite tai venttiilin koko? Noudata nimellistä painetta (PN) ja käyttöarvoa (T) teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liittymisen mittojen on vastattava putken halkaisijaa.
  • Kuinka tämä laite tai venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, taaksepäin suuntautuminen jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalousmestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä ovat turvallisuustoiminnot.

Các thông số bổ sung

Danh mục hàng: BRA.W6.626 - takaiskuventtiilit - jousikuormitteiset ruostavapaat
Bảo hành: 2 năm
Trọng lượng: 0.294 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:03:41

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 09.11.2026 10:34
Buenos días, un saludo, me gustaría saber si esta válvula antirretorno BRA.W6.626 resulta adecuada para una instalación de calefacción que trabaja con agua glicolada al 30% y una presión de servicio habitual de 6 bar, dado que necesito confirmar la compatibilidad antes de proceder a la compra. Asimismo, quisiera confirmar si la presión mínima de contracorriente necesaria para su correcto cierre es compatible con circuitos de baja presión diferencial.
A avatar của tác giả 09.11.2026 10:34
Buenos días Mario. Sí, esta válvula está preparada para agua con hasta un 50% de glicol, así que su 30% entra perfectamente dentro de rango, y con 6 bar de servicio va sobrada porque soporta hasta 40 bar entre bridas. Respecto al cierre, necesita solo 0,1 bar de contrapresión para actuar, por lo que funciona bien incluso en circuitos con poca presión diferencial. Para el dato exacto de presión de apertura según el DN 25 te recomendamos revisar la ficha técnica del producto.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.