Eshop roka 2025 s vykurovacou technikou

T-putki 90° - pienennetty - ruostumaton AISI 316 - 108-54-108 mm IVAR.IVN41

Mã số: IVN41.10854108
Chưa được đánh giá Chi tiết đánh giá
301,35 € –20 %
Vykurovacia technika T-kus 90° - redukovaný - nerez AISI 316 - 108-54-108mm
301,35 € –20 % 241,08 € / Cái 196 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-liitos 90° - piennetty - N - 108-54-108mm

  • PN 16, T = -20 °C - +85 °C - max. +120 °C
  • T-liitos 90° piennetty PRESS x PRESS x PRESS
  • käyttötarkoitus: terveysteknisille asennuksille, sprinklerijärjestelmille,
    lämmitysjärjestelmille, paineilmalle, aurinkolämpöjärjestelmille, inertille kaasuille ja teollisuudelle
  • materiaali: ruostumaton teräs luokka Wst. Nr. 1.4404 (AISI 316L), EPDM-tiiviste

Huomio: Tiivistämätön, jos ei ole puristettu ja puristusindikaattorilla halkaisijaltaan 54 mm.

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (veden, lämmityksen, kaasun, aurinkolämpöjärjestelmien, paineilman jne. putkistot) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niille on sertifioitu eri väliaineet.
  • Miten tämä putki liitetään? Yleensä puristusliitoksilla (press) tai hitsauksella, riippuen järjestelmästä ja halkaisijasta - käytä samaan järjestelmään sopivia sovitteita.
  • Onko asennus tehtävä ammattilaisen toimesta? Kyllä, erityisesti kaasu-, paineilmaputkistoissa tai hitsatuissa liitoksissa asennus on varattava henkilölle, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN40, IVN41 - T-kappaleet
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 26.05.2026 8:49:09

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

S avatar của tác giả 07.11.2026 17:59
Passt das T-Stück 108-54-108 mm für meine Heizungsanlage mit Solarenergie, und muss ich beim Pressen zwingend bis zur Markierung 54 mm gehen?
A avatar của tác giả 07.11.2026 17:59
Ja, der Edelstahl AISI 316L ist explizit für Heizsysteme und Solarsysteme ausgelegt. Beim Pressen müssen Sie unbedingt bis zur Maßangabe von 54 mm gehen, da das Teil sonst undicht wird. Für ähnliche Anwendungen schauen Sie sich auch unsere anderen IVAR.T-Stücke an.
T avatar của tác giả 05.10.2026 08:22
Hi, ich habe ein Problem mit meinen Rohren, die haben verschiedene Dicke und ich weiß nicht, ob dieses Teil passt. Muss ich dafür extra einen Handwerker holen oder kann ich das selbst zusammenpressen?
A avatar của tác giả 05.10.2026 08:22
Das T-Stück ist für unterschiedliche Rohrgrößen gemacht (108-54-108 mm) und verbindet sich durch Pressen. Da es aber für Heizungen und Druckluft genutzt wird, sollten Sie die Montage besser einem Fachmann überlassen, der das richtig macht. Wenn Sie mehr Details zu den Maßen brauchen, schauen Sie in die technischen Daten auf der Produktseite.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.