Eshop roka 2025 s vykurovacou technikou

T-liitos PRESS - pienennetty - 26x20x16 IVAR.PT 5720 R

Mã số: 512011
Chưa được đánh giá Chi tiết đánh giá
20,54 € –20 %
Vykurovacia technika T-kus PRESS redukovaný - 26x20x16
20,54 € –20 % 16,43 € / Cái 13,36 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (22 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-liitos press - pienennetty, IVAR.PT 5720 R, koko: 26 x 20 x 16, pakkaus: 5 pussia / 60 koko laatikko

 

Usein kysyttyä

  • Mitä työkaluja tarvitsen liitososan asennukseen? Press-liitokset vaativat erikoistuneet puristuspihdit oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmän mukaan) vastaamaan liitososan kokoa ja tyyppiä - ilman oikeaa työkalua liitosta ei voi muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liitokset sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa jos puristus ei ole valmis) - ennen upotusta seinään tai laastiin on aina suoritettava järjestelmän paineentarkistus.
  • Voiko liitoksen purkaa sen jälkeen kun se on puristettu? Ei, toisin kuin puristusliitokset, puristusliitos on pysyvä ja sen purkaminen vaatii liitososan leikkaamisen ja korvaamisen uudella.
  • Pitäisikö asennuksen suorittaa ammattilainen? Kyllä, puristusliitosten asennus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan asennuksen lämmitysasentajalle, erityisesti liitoksille, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: T-haara press redusointi
Bảo hành: 2 năm
Trọng lượng: 0.247 kg
Liittimen tyyppi: T-kappale
Putken halkaisija: 16 mm, 20 mm, 26 mm
Liitäntätyyppi: puristusliitos
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:05:29

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 29.09.2026 16:05
Chcel by som sa opýtať, či je možné tento T-kus PRESS redukovaný 26x20x16 použiť na odbočku, kde hlavné potrubie je 26 mm a na odbočku by som pripájal potrubie s prechodom na 16 mm bez ďalšej redukcie. Zaujímalo by ma tiež, či je vhodný na medené aj viacvrstvové potrubie.
A avatar của tác giả 29.09.2026 16:05
Dobrý deň, áno, presne na toto je tento T-kus určený - hlavná vetva má rozmer 26 mm, odbočka rovno 16 mm, takže žiadnu ďalšiu redukciu netreba riešiť. Lisovacie tvarovky PRESS sa bežne používajú pre viacvrstvové aj medené potrubie, len je dobré overiť, akú čeľusť má váš lisovací nástroj, nech sedí na daný systém. Ak by ste potrebovali iný pomer priemerov, pozrite sa aj na ostatné T-kusy PRESS redukované v tejto kategórii.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.