Eshop roka 2025 s vykurovacou technikou

T-liitos PRESS-GAS - sisäpihdit - 20x3/4"Fx20 IVAR.PT 5722-GAS

Mã số: 512023GAS
Chưa được đánh giá Chi tiết đánh giá
20,05 € –20 %
Vykurovacia technika T-kus PRESS-GAS  - závit vnútorný - 20x3/4"Fx20
20,05 € –20 % 16,04 € / Cái 13,04 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-liitos PRESS-GAS - sisäinen kierre, IVAR.PT 5722-GAS, koko: 20 x 3/4" F x 20, pakkaus: 5 pussia / 100 pakkauslaatikko

 

  • maksimipaine PN 10, T = -20 °C - +60 °C
  • maksimikäyttöpaine PN 5
  • ALPEX-GAS putken liittämiseen ulkoiselle kierre
  • materiaali messinki CW617N, tiiviste HNBR

 

yhteensopiva B-tyypin puristimien kanssa

Suositeltu käyttö PTN 704 05 mukaan

Usein kysyttyä

  • Mitä työkaluja tarvitsen liitososan asentamiseen? Puristusliitokset vaativat erikoistyökalut, kuten puristuspihdit oikealla leuka-tyypillä (yleensä B, F tai TH järjestelmän mukaan) sopivalle koolle ja tyypille - ilman oikeaa työkalua liitosta ei voi muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat puristusliitokset on varustettu puristusindikaattorilla (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai tasoitteeseen, on aina tehtävä paineentarkistus koko järjestelmässä.
  • Voiko liitoksen purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin ruuviliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, puristusliitosten asennus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan asennuksen lämmitysteknikolle/asentajalle, erityisesti liitoksissa, jotka upotetaan seinään tai tasoitteeseen ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: IVAR.PT 5722-GAS - T-haara sisäkierteillä
Bảo hành: 2 năm
Trọng lượng: 0.16 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:03:00

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 18.11.2026 16:26
Good morning, I want to connect my gas pipe to a screw-in part with this piece, but I don't know if I can just screw it together myself or if I need to pay someone to squeeze it with a special tool? Also, can I later take it apart if I make a mistake?
A avatar của tác giả 18.11.2026 16:26
Good morning Daniel. The 3/4" side is a regular female thread, so that part can be screwed on normally, but the other two ends need to be joined to the Alpex-Gas pipe using a proper pressing tool with type B jaws - this is not something you can do by hand. Once pressed, the joint is permanent and can't be taken apart - if something's wrong, the fitting has to be cut out and replaced with a new one. Since it's a gas connection, we'd really recommend having a qualified installer do the job and test it afterwards.
M avatar của tác giả 22.10.2026 09:05
Kell ehhez a 20x3/4"-os T-idomhoz valami különleges préselő szerszám, vagy elég a sima csavarozó kulcs?
A avatar của tác giả 22.10.2026 09:05
Ehhez a szerelvényhez nem elég kulcs, mert ez préselt kötés. Szükséged lesz egy speciális préselő fogóra és a méretnek megfelelő présfejjel (általában B, F vagy TH jelölésű), különben a kötés nem lesz biztonságos és ellenőrizhető sem. A beszerelést mindenképpen szakemberre bízná javasoljuk, különösen ha falba kerül.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.