Eshop roka 2025 s vykurovacou technikou

T-liitos PRESS-GAS - pienennetty - 20x26x20 IVAR.PT 5720-GAS R

Mã số: 512014GAS
Chưa được đánh giá Chi tiết đánh giá
25,95 € –20 %
Vykurovacia technika T-kus PRESS-GAS  - redukovaný - 20x26x20
25,95 € –20 % 20,76 € / Cái 16,88 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (6 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-KUS PRESS-GAS - pienennetty, IVAR.PT 5720-GAS R, koko: 20 x 26 x 20, pakkaus: 5 pussia / 60 laatikko

 

  • suurin sallittu paine PN 10, T = -20 °C - +60 °C
  • suurin käyttöpaine PN 5
  • ALPEX-GAS -putkien eri halkaisijoiden liittämiseen
  • materiaali messinki CW617N, tiiviste HNBR
  • yhteensopiva B-tyypin puristusleukojen kanssa

 

Suositeltu käyttö PTN 704 05 mukaan

Usein kysyttyä

  • Mitä työkaluja tarvitsen liittimen asennukseen? Press-liittimet vaativat erikoistyökaluja, joissa on oikean tyyppinen leuka (yleensä merkitty B, F tai TH järjestelmän mukaan) sopivaksi liittimen koon ja tyypin mukaan - ilman oikeita työkaluja liitosta ei voi muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaissa press-liittimissä on puristusindikaattori (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina tehtävä järjestelmän paineentarkistus.
  • Voiko liitoksen purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin ruuviliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksissa, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: IVAR.PT 5720-GAS R - redusoitu T-kappale
Bảo hành: 2 năm
Trọng lượng: 0.261 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:08:53

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 18.09.2026 13:52
I am planning to connect a gas installation using press fittings and need to confirm whether this reduced T-piece with dimensions 20x26x20 is suitable for joining two 20 mm pipes to a 26 mm main line, or whether the size notation refers to a different configuration.
A avatar của tác giả 18.09.2026 13:52
Yes, that's exactly right — the 20x26x20 means the branch connections on both sides are 20 mm and the through-run (main line) is 26 mm, so it's designed to reduce from a 26 mm main down to two 20 mm branches. It's a PRESS-GAS fitting, so it's approved for gas installations and needs to be pressed with the appropriate press tool. If you need matching straight couplings or elbows in the same PRESS-GAS range, we carry those as well.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.