Eshop roka 2025 s vykurovacou technikou

T-liitos 90° PRESS GAS - pienennetty - 54-35-54 mm IVAR.IVN41 GAS

Mã số: IVNGAS41.543554
Chưa được đánh giá Chi tiết đánh giá
48,59 € –20 %
Vykurovacia technika T-kus 90° PRESS GAS - redukovaný - 54-35-54mm
48,59 € –20 % 38,87 € / Cái 31,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-liitos 90° PRESS GAS - pienennetty - 54-35-54 mm

Huomio: Press GAS -liittimien koot 76,1, 88,9 ja 108 mm tilaustuotteita.

Usein kysyttyä

  • Mitä työkaluja tarvitsen liitososan asennukseen? Press-liitokset vaativat erikoistuneet puristuspuristimet oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmän mukaan) vastaavalle koolle ja tyypille - ilman oikeaa työkalua liitos ei ole mahdollista muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liitokset on varustettu puristusindikaattorilla (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos on upotettu seinään tai tasoitteeseen, on aina tehtävä järjestelmän paineentarkistus.
  • Voiko liitos avata sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitos, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysteknikolle/asentajalle, varsinkin liitoksille, jotka upotetaan seinään tai tasoitteeseen ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN41 GAS - 90° redusoitu T-liitin PRESS GAS
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:07:27

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 07.10.2026 13:20
I need to connect a 54mm gas pipe to a 35mm one using this fitting, but I'm not sure if the stainless steel and O-ring materials are suitable for propane gas phase systems.
A avatar của tác giả 07.10.2026 13:20
Yes, this T-piece is specifically designed for natural gas, biogas, and propane gas phase piping systems. It is made of AISI 316L stainless steel with a yellow HNBR sealing O-ring that meets all necessary certifications for this purpose.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.