Eshop roka 2025 s vykurovacou technikou

T-kappale PRESS - 20x20x20 IVAR.PT 5720

Mã số: 512002
Chưa được đánh giá Chi tiết đánh giá
14,27 € –19 %
Vykurovacia technika T-kus PRESS - 20x20x20
14,27 € –19 % 11,42 € / Cái 9,28 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (36 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-liitos PRESS - 20x20x20

Usein kysyttyä

  • Mitä työkaluja tarvitsen liitososan asentamiseen? Press-liitokset vaativat erikoistyökalut, kuten puristuspihdit oikealla leukojen tyypillä (yleensä B, F tai TH järjestelmästä riippuen) sopivan koon ja tyypin mukaan - ilman oikeaa työkalua liitosta ei voi muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liitokset sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai tasoitteeseen, on aina tehtävä paineentarkistus koko järjestelmälle.
  • Voiko liitoksen purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, puristusliitosten asentaminen vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksissa, jotka upotetaan seinään tai tasoitteeseen ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: T-haara press
Bảo hành: 2 năm
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:07:49

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 08.11.2026 19:08
Sto valutando di usare questo T-kus per tubi Alpex da 20mm, ma ho bisogno di sapere se con l'ottone CW617N resiste bene a temperature fino a 120 gradi senza problemi e quale tipo di pinza devo comprare per installarlo.
A avatar của tác giả 08.11.2026 19:08
Sì, questo raccordo è progettato proprio per resistere a temperature fino a +120°C ed è compatibile con tubi Alpex da 20mm in ottone cianfratto. Per l'installazione ti serviranno assolutamente delle pinze pressanti specializzate con i morsetti corretti (come B, F o TH) tarati per le dimensioni del raccordo. Ricorda che la giunzione è permanente e non smontabile, quindi ti consiglio vivamente di affidarti a un tecnico specializzato per evitare errori.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.