Eshop roka 2025 s vykurovacou technikou

90° PRESS GAS - 28mm IVAR.IVN40 GAS

Mã số: IVNGAS40.28
Chưa được đánh giá Chi tiết đánh giá
24,85 € –20 %
Vykurovacia technika T-kus 90° PRESS GAS - jednoznačný - 28mm
24,85 € –20 % 19,88 € / Cái 16,16 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-liitos 90° PRESS GAS - yksiselitteinen - 28mm

Huomautus: Press GAS -liittimien koot 76,1, 88,9 ja 108 mm tilaustuotteita.

Usein kysyttyä

  • Mitä työkaluja tarvitsen tämän liittimen asennukseen? Press-liittimet vaativat erikoistuneet puristuspihdit, joissa on oikean tyyppinen leuka (yleensä merkitty B, F tai TH järjestelmästä riippuen) sopivalle koolle ja tyypille - ilman oikeita työkaluja liitosta ei voi muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liittimet sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina suoritettava järjestelmän paineentarkistus.
  • Voidaanko liitos purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitos, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksille, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN40 GAS - t-kusy 90° PRESS GAS
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 0:59:52

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

G avatar của tác giả 01.11.2026 19:08
Grüß Gott, wir wollen daheim die Gasleitung für den Herd umbauen und der Papa hat eine normale Presszange für Wasser da. Geht die auch für das Gas-T-Stück oder brauchen wir da ein extra Werkzeug, und darf man das überhaupt selber pressen?
A avatar của tác giả 01.11.2026 19:08
Für dieses Fitting braucht man eine Presszange mit dem passenden Zangentyp (z. B. B, F oder TH) für 28 mm - eine normale Wasser-Presszange passt da meistens nicht, das muss zum System passen. Außerdem gilt: Gasleitungen dürfen nicht selbst verpresst werden, das gehört in die Hände eines Installateurs, schon wegen der Fachkenntnis und weil danach ein Drucktest gemacht werden muss. Am besten lasst ihr das euren Heizungsbauer erledigen, der hat auch das richtige Werkzeug dafür.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.