Eshop roka 2025 s vykurovacou technikou

T-haara 90° PRESS GAS - supistettu - 28-22-28 mm IVAR.IVN41 GAS

Mã số: IVNGAS41.282228
Chưa được đánh giá Chi tiết đánh giá
23,49 € –20 %
Vykurovacia technika T-kus 90° PRESS GAS - redukovaný - 28-22-28mm
23,49 € –20 % 18,79 € / Cái 15,28 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

T-haara 90° PRESS GAS - supistettu - 28-22-28 mm

Huomautus: PRESS GAS -putkiosien koot 76,1, 88,9 ja 108 mm tilauksesta.

Usein kysytyt kysymykset

  • Mitä työkaluja tämän putkiosan asennukseen tarvitaan? Puristusliittimet (press) vaativat erikoispuristuspihdit, joissa on oikeantyyppinen leuka (tavallisesti merkitty B, F tai TH järjestelmän mukaan) putkiosan koon ja tyypin mukaan - ilman oikeita työkaluja liitosta ei voi tehdä eikä tarkastaa.
  • Mistä tiedän, että liitos on puristettu oikein? Laadukkaissa press-putkiosissa on puristuksen ilmaisin (esim. tiivistävä O-rengas, joka vuotaa, jos puristus on kesken) - ennen seinään tai tasoitteeseen valamista koko järjestelmälle on aina tehtävä painekoe.
  • Voiko liitoksen purkaa puristuksen jälkeen? Ei, toisin kuin ruuvattava (puserrus)liitos, puristusliitos on pysyvä, ja sen purkaminen edellyttää putkiosan katkaisemista ja uuden asentamista tilalle.
  • Pitääkö asennuksen tehdä ammattilaisen? Kyllä, putkiosien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme jättämään työn LVI-asentajalle, erityisesti liitoksissa, jotka valetaan seinään tai tasoitteeseen ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN41 GAS - 90° redusoitu T-liitin PRESS GAS
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:04:18

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

G avatar của tác giả 20.10.2026 10:23
Je souhaite confirmer si ce coude à T réduit 28-22-28 mm en acier inoxydable est bien compatible avec un réseau de propane en phase liquide et si le joint torique jaune permet une utilisation jusqu'à +70 °C.
A avatar của tác giả 20.10.2026 10:23
Bonjour, ce raccord est effectivement conçu pour les réseaux de gaz naturel, biogaz et propane liquide avec une plage de température allant de -20 °C à +70 °C. Le matériau utilisé est bien l'acier inoxydable Wst. Nr. 1.4404 (AISI 316L) équipé d'un joint HNBR jaune. Vous pouvez consulter les autres tés réduits de la catégorie IVAR.IVN41 GAS pour des besoins similaires.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.