Eshop roka 2025 s vykurovacou technikou

Suora ruuvi - putki/sisäinen kierteitys - 20x1/2"; PE ulkoiselle kierteelle FIV.07710

Mã số: I07710012
Chưa được đánh giá Chi tiết đánh giá
8,63 € –20 %
Vykurovacia technika Šróbenie priame - potrubie/vnútorný závit - 20x1/2"; PE na vonkajší závit
8,63 € –20 % 6,90 € / Cái 5,61 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

  • PN 16, T = -20 °C až +90 °C
  • liitintä käytetään PE-putken liittämiseen ulkoisella kierteellä
  • rungon materiaali messinki CW617N standardin EN 12165 mukaan, puristusrengas messinki CW614N standardin EN 12164 mukaan, O-rengastiiviste NBR, STOP-O-ring
 

Usein kysyttyä

  • Miten valitsen oikean kokoisen liittimen? Kierreruuvin mitan on vastattava tarkasti putken tai varusteen kierremittaa, johon liitin kiinnitetään - lyhenteet FF (sisäkierre-sisäkierre) ja MF (ulkokierre-sisäkierre) nimen yhteydessä ilmoittavat kierteityypin kummallakin puolella.
  • Onko tiivistysmateriaalia tarvittava asennuksen yhteydessä? Kierteitetyissä liitoksissa käytetään yleensä teflontapeeta tai hamppukangasta tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaiset kierreliitokset onnistuvat perustaidoilla myös kotityöläiseltä, mutta jos joudutaan tekemään toimivaan järjestelmään (erityisesti kaasujärjestelmään) muutoksia, suosittelemme ottamaan yhteyttä asentajiin, jotka myös varmistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: Suorat liittimet - putki / sisäkierre
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:11:03

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 04.10.2026 18:59
I need to connect a 20mm PE pipe to an existing male thread, but will this brass fitting handle the pressure if my system runs hot?
A avatar của tác giả 04.10.2026 18:59
Yes, this straight union is rated for PN 16 and works perfectly at temperatures up to +90 °C. It features a brass body and clamping ring designed specifically for connecting PE pipes to threaded bodies. Just remember to use PTFE tape or hemp fiber with sealing paste on the threads to ensure it stays leak-tight.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.