Eshop roka 2025 s vykurovacou technikou

Suora kiinnike - sisäinen kierteitys - 1/2"x1/2" IVAR.970 G

Mã số: 970015015
Chưa được đánh giá Chi tiết đánh giá
15,99 € –20 %
Vykurovacia technika Šróbenie priame - vnútorný závit - 1/2"x1/2"
15,99 € –20 % 12,79 € / Cái 10,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Tilaustuote (1-2 viikkoa)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Ruuviliitos - suora - sisäpultti, IVAR.970 G, koko: 1/2" x 1/2", pakkaus: 10 kpl

 

  • PN 10, T = +120 °C
  • materiaali messinki CW617N
  • ATEST juomavedelle (RÚVZ Poprad)

Usein kysyttyä

  • Miten valita oikea kokoinen liitin? Kierrerungon koon on vastattava tarkasti putken tai varusteen kierrerunkoa, johon liitin kiinnitetään - lyhenteet FF (sisä-sisä kierre) ja MF (ulko-sisä kierre) nimessä ilmoittavat kierretyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kyllä, kierreliitoksiin käytetään standardisti teflonnauhaa tai hamppukuitua tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus ammattilaisen suoritettava? Yksinkertainen kierreliitos onnistuu perustaidoilla myös kotityöläiseltä, mutta jos joudutaan koskemaan jo toimivaan järjestelmään (erityisesti kaasujärjestelmään), suosittelemme kutsumaan asentajan, joka myös tarkistaa liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: Suorat liittimet - sisäkierre
Bảo hành: 2 năm
Trọng lượng: 0.204 kg
Materiaali: messinki CW617N ATEST juomaveteen
Käytännön lämpötila: +120 °C
Liittimen tyyppi: liitin (kierreliitos)
Kierteen koko: 1/2"
Materiaali: messinki
Liitäntätyyppi: sisäkierre
Mäntäispaine: PN 10
Posledná aktuálizacia ceny: 13.04.2026 1:11:30

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

L avatar của tác giả 17.11.2026 22:35
Potrebujem spojiť dve potrubia, obe majú vonkajší závit 1/2". Dá sa toto šróbenie na to použiť, keď má na oboch stranách vnútorný závit, alebo potrebujem iný typ fitingu?
A avatar của tác giả 17.11.2026 22:35
Áno, toto šróbenie má na oboch stranách vnútorný závit 1/2", takže sa naň potrubia s vonkajším závitom 1/2" naskrutkujú priamo bez ďalšej redukcie. Na utesnenie spoja použite teflónovú pásku alebo konopné vlákno s tesniacou pastou, materiál je mosadz CW617N s atestom na pitnú vodu, takže sa dá použiť aj na rozvody vody. Ak by ste potrebovali spojiť dve rúry s vnútorným závitom, treba siahnuť po fitingu s vonkajším závitom na oboch stranách (MM).
T avatar của tác giả 15.09.2026 13:19
Zdravím, chcem sa opýtať, či toto šróbenie 1/2"x1/2" pasuje na bežný radiátor doma, lebo neviem či má rovnaký závit alebo nie, nechcem kúpiť niečo čo nepasuje.
A avatar của tác giả 15.09.2026 13:19
Áno, 1/2" vnútorný závit je štandardný rozmer, ktorý sa bežne používa pri radiátoroch v domácnostiach. Treba si ale overiť, či váš radiátor má vonkajší závit 1/2" – ak áno, toto šróbenie k nemu pasuje. Ak si nie ste istí, môžete nám poslať fotku pripojovacieho miesta a radi poradíme.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.