Eshop roka 2025 s vykurovacou technikou

Suodatin imukuppeen - BRA.F5.000 - DN 100; L=150mm BRA.50.000

Mã số: 50000100
Chưa được đánh giá Chi tiết đánh giá
215,25 € –20 %
Vykurovacia technika Sítko pre sací kôš - na BRA.F5.000 - DN 100; L=150mm
215,25 € –20 % 172,20 € / Cái 140 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Sitko varten imukourua - BRA.F5.000, BRA.50.100, mitoitus: DN 100, pituus: 150 mm

 

  • prikytykseen laipoille PN 16 mukaan STN EN 1092-1
  • materiaali: sinkitty teräs (tilauksesta ruostumaton AISI 316 - tyyppi BRA.53.000)
  • reiän koko 5 mm

Usein kysyttyä

  • Miten valitsen oikean tyypin ja koon liittimestä/venttiilistä? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden tulee vastata tai ylittää järjestelmäsi todelliset käyttöolosuhteet, ja liitosmitoituksen tulee vastata putken halkaisijaa.
  • Miten tämä liitin/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, taaksepäin suuntautuminen jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Pitääkö asennuksen tehdä ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalousmestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: BRA.50.000 - putkiston takaiskuventtiilin F5 siivilät
Bảo hành: 2 năm
Trọng lượng: 1.214 kg
Nimellishalkaisija (DN): DN 100
Venttiilin tyyppi: suodatin / seula
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:08:07

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 25.10.2026 16:50
Bonjour à vous, j'ai un clapet BRA.F5.000 et je cherche une grille de 150 mm avec des trous de 5 mm pour du DN 100, est-ce que l'acier galvanisé suffit ou faut-il absolument prendre le modèle inox ?
A avatar của tác giả 25.10.2026 16:50
Ce produit correspond exactement à votre besoin : c'est bien la grille pour le BRA.F5.000 en acier galvanisé avec des trous de 5 mm pour du DN 100. Si vous avez besoin d'inox AISI 316, il faudra commander le type BRA.53.000 qui est fait sur mesure. Le prix et la disponibilité sont indiqués directement sur la fiche produit.
R avatar của tác giả 25.07.2026 21:53
Chcem vymeniť sítko na existujúcom sacom koši BRA.F5.000 DN 100 – je toto sítko priamo náhradným dielom pre tento model, alebo sa jedná o samostatnú komponentu, ktorú treba dodatočne upravovať pred montážou?
A avatar của tác giả 25.07.2026 21:53
Áno, toto sítko je priamo určené pre sací kôš BRA.F5.000 DN 100, takže ide o plnohodnotný náhradný diel bez potreby akýchkoľvek úprav. Dĺžka sítka je 150 mm, čo zodpovedá štandardnej konštrukcii tohto modelu, a montáž prebieha priamou výmenou za pôvodný diel. Pri výmene odporúčame skontrolovať stav tesnení a príruby, aby po opätovnom spustení nevznikali nežiaduce netesnosti. Ak by ste pri kontrole zistili poškodenie aj iných komponentov sacej zostavy, v kategórii prírubových sítok k spätnej klapke F5 nájdete všetky súvisiace diely na jednom mieste. V prípade ďalších otázok k montáži nás neváhajte kontaktovať.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.