Eshop roka 2025 s vykurovacou technikou

Suodatin 5" - 1"F; PP-insertti - TARJOUS GEL.DEPURA 550 PP

Mã số: 101.027.5L
Akcia
Chưa được đánh giá Chi tiết đánh giá
64,45 € –46 %
Vykurovacia technika Filter 5" - 1"F; vložka PP  - akcia
64,45 € –46 % 34,50 € / Cái 28,05 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Suodatin 5", GEL.DEPURA 550 PP, koko: 1" F, PP-insertti

 
  • PN 6, T = +40 °C
  • suodattimen koko 5“
  • mekaanisten epäpuhtauksien suodattamiseen juomavedestä
  • variantti: PP-insertti 90 μm
  • mahdollisuus käyttää erilaisia 5“ kokoisia suodatinpatruunoita, katso DEPURA-SUODATINPATRUUNAT
  • mitat: korkeus 260 mm, Ø 130 mm
  • materiaali: PP-suodatinpää messinkisellä kiinnikkeellä, SAN-säiliö
  • asennusavain: koodi 125.210.50
  • JUOMAVEDEN LAATUTODISTUS, RÚVZ Poprad

 

DEPURA-suodattimet valmistetaan terveydelle vahingoittamattomista materiaaleista eri kokoisina ja malleina käyttötarkoituksen mukaan. Konkreettisen arvioinnin, tai veden analyysin perusteella valitaan sopivat suodatinpatruunat.

Usein kysyttyä

  • Kuinka usein suodatin/suodatinpatruuna on vaihdettava tai puhdistettava? Intervalli riippuu veden laadusta ja käytön intensiteetistä - suosittelemme säännöllistä silmämääräistä tarkastusta ja puhdistusta/vaihtoa valmistajan ohjeiden mukaisesti, tai näkyvän virtauksen laskun yhteydessä.
  • Mihin suodatin asennetaan? Yleensä päävesijohtoon rakennukseen, ennen herkkiä laitteita (kattila, vesijärjestelmä) siten, että se suojaa koko järjestelmää epäpuhtauksilta.
  • Onko asennuksen suoritettava ammattilainen? Vesijärjestelmään liittämisen suosittelemme jättämään asentajalle, varsinkin jos se vaatii olemassa olevan putken katkaisun.

Các thông số bổ sung

Danh mục hàng: Juomaveden suodattimet
Bảo hành: 2 năm
Trọng lượng: 0.768 kg
EAN: 8018244102499
Tyyppi: vesisuodatin
Kierteen koko: 1"
Suodattimen / patruunan koko: 5"
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 09.07.2026 12:26:48

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

V avatar của tác giả 12.10.2026 16:27
Bonjour à vous, je souhaiterais savoir si ce filtre 5" avec insert PP et dimensions de 1" F est compatible avec une tuyauterie principale en acier pour la protection des appareils sensibles avant le système sanitaire, et quel matériau compose le récipient ?
A avatar của tác giả 12.10.2026 16:27
Ce modèle est bien conçu pour être installé sur l'arrivée principale d'eau afin de protéger les appareils comme le chauffage ou le réseau sanitaire. Le récipient est fabriqué en SAN et la tête du filtre en PP avec un bouchon en laiton, ce qui garantit sa solidité pour cet usage. Pour plus de détails sur les cartouches compatibles, n'hésitez pas à consulter notre catégorie FILTRES DEPURA.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.