Eshop roka 2025 s vykurovacou technikou

Takaiskuventtiili kierteellinen - sērija Y6; ruostumaton teräs - 6/4""; "L=119mm BRA.Y6.623

Mã số: Y6623112
Chưa được đánh giá Chi tiết đánh giá
225,09 € –20 %
Vykurovacia technika Spätný ventil závitový - séria Y6; nerez - 6/4"; L=119mm
225,09 € –20 % 180,07 € / Cái 146,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Takaiskuventtiili - kierteinen, BRA.Y6.623, koko: 6/4", pituus: 119 mm

 

  • maksimipaine 40 bar, kierteillä 1/4” - 2” F/F ISO 228-1 mukaan
  • T = -20 °C - max. +180 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohtoihin, pumppuasemille, öljy- ja hiilivetyjärjestelmiin, kemian- ja elintarviketeollisuuteen
  • materiaali: runko, levy - ruostumaton teräs A351 CF8M, jousi - AISI 316, tiiviste - PTFE
  • asennus kaikissa asennoissa
  • minimitoimipaine 0,15 bar
  • käyttö veteen, jossa on jopa 50 % glykoleja
  • ei sovellu höyryyn
  • JUOMAVESI-ATEST

Usein kysyttyä

  • Miten valita oikea venttiilityyppi ja koko? Valitse venttiili, jonka nimellistyöpaine (PN) ja käyttölämpötila (T) vastaavat tai ylittävät järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko vastaa putken halkaisijaa.
  • Miten tämä venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu venttiilityypistä - yksityiskohtainen toimintakuvaus löytyy tuotteen teknisistä tiedoista.
  • Onko asennus ammattilaisen tehtävä? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvaventtiileiden (turvaventtiilit, paineensäätöventtiilit) asennus on turvallisuussyistä suositeltavaa jättää ammattilaisen tehtäväksi.

Các thông số bổ sung

Danh mục hàng: BRA.Y6.623 - takaiskuventtiilit, kierretään, ruostumaton teräs
Bảo hành: 2 năm
Trọng lượng: 1.209 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:10:19

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 28.10.2026 13:01
Máte istotu, že tento ventil z nerezovej ocele CF8M vydrží v systéme s vodou a 50% glykolom pri teplotách do 180 °C?
A avatar của tác giả 28.10.2026 13:01
Áno, táto klapka je určená práve na takéto podmienky – materiál je nerez A351 CF8M a tesnenie PTFE, čo zvláda teploty od -20 do +180 °C aj s pridaným glykolom. Neodporúčame ju však na paru, pretože nie je pre ňu vhodná. Ak hľadáte iný typ pre špecifické aplikácie, pozrite si našu kategóriu spätných klapiek.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.