Eshop roka 2025 s vykurovacou technikou

Sito imusäiliölle - BRA.F5.000 - DN 150; L=200mm BRA.50.000

Mã số: 50000150
Chưa được đánh giá Chi tiết đánh giá
286,59 € –20 %
Vykurovacia technika Sítko pre sací kôš - na BRA.F5.000 - DN 150; L=200mm
286,59 € –20 % 229,27 € / Cái 186,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Sitko varten imukourua - takaiskuventtiili BRA.F5.000, BRA.50.000, koko: DN 150, pituus: 200 mm

 

Usein kysyttyä

  • Miten valita oikeanlainen ja -kokoinen venttiili/liitos? Ohjaa nimellispaineeseen (PN) ja käyttölämpötilaan (T), jotka on ilmoitettu teknisissä tiedoissa - niiden on vastattava tai ylittävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Kuinka tämä venttiili/liitos toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, taaksepäin suuntautuminen jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus suoritettava ammattilaisen toimesta? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalouden mestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenvähennysventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä ovat turvallisuustoimintoiset komponentit.

Các thông số bổ sung

Danh mục hàng: BRA.50.000 - putkiston takaiskuventtiilin F5 siivilät
Bảo hành: 2 năm
Trọng lượng: 2.097 kg
Nimellishalkaisija (DN): DN 150
Venttiilin tyyppi: suodatin / seula
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:09:07

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

S avatar của tác giả 28.10.2026 08:17
I require confirmation regarding the material composition of this strainer intended for DN 150 flanges, specifically whether the standard galvanized steel construction is sufficient for my system or if a stainless steel AISI 316 variant must be ordered.
A avatar của tác giả 28.10.2026 08:17
The standard model you selected is indeed made of galvanized steel, which fits your PN 16 flange requirements perfectly. If you need the corrosion-resistant version in stainless steel AISI 316, you should look for the type BRA.53.000 instead. Both options share the same 200 mm length and 5 mm hole size specifications.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.