Eshop roka 2025 s vykurovacou technikou

Saniteettinen joustava letku (9x13) - 3/8" FF; 40 cm IVAR.150201

Mã số: 15020140
Chưa được đánh giá Chi tiết đánh giá
8,63 € –20 %
Vykurovacia technika Sanitárna flexi-ohybná hadica (9x13)  - 3/8"FF; 40cm
8,63 € –20 % 6,90 € / Cái 5,61 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Saniteettinen joustava letku - joustava (9 x 13), IVAR.150201, koko: 3/8" FF, pituus: 40 cm, pakkaus: 10 kpl

  • PN 10, T = +90 °C
  • ruostumaton punos, mukaan lukien tiiviste
  • kierre sisä - sisä FF
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysytyt kysymykset

  • Miten valita oikean tyyppinen ja kokoinen laippa/venttiili? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T) teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laippa/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: FF 3/8"
Bảo hành: 2 năm
Trọng lượng: 0.101 kg
Kierteen koko: 3/8"
Pituus: 31 – 50 cm
Letkun tyyppi: joustava sanitaarisletku
Liitäntätyyppi: sisäkierre
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:11:18

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 24.10.2026 15:18
I need a hose for my radiator that fits 3/8" FF connections and can handle hot water up to 90°C. Does this IVAR flexi hose meet those requirements and is it safe for drinking water systems?
A avatar của tác giả 24.10.2026 15:18
Yes, this flexible hose is designed exactly for that with 3/8" FF connections and an operating temperature of +90 °C. It features stainless steel braiding and holds a certificate for drinking water from RÚVZ Poprad. You can find similar fittings in our category of sanitary hoses if you need different lengths.
B avatar của tác giả 27.08.2026 21:52
Jó napot, apámnak kellene egy flexcső a mosdó alá, most nézzük ezt a 40 centis 3/8-as darabot. Jó lesz ez simán, vagy kell még valami hozzá?
A avatar của tác giả 27.08.2026 21:52
Szia! Ez a 40 cm-es flexi cső 3/8"-os menettel van mindkét végén, szóval ha a csap és a szelep is 3/8"-os, akkor egyből rá lehet csavarni, semmi extra nem kell. Ha esetleg az egyik oldal más méretű, akkor érdemes megnézni a többi méretű változatot is, van belőlük választék. A hossz mosdó alá általában bőven elég szokott lenni.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.