Eshop roka 2025 s vykurovacou technikou

Saniteettinen joustava letku (9x13) - 1/2"FF; 40 cm IVAR.150204

Mã số: 15020440
Chưa được đánh giá Chi tiết đánh giá
9,07 € –19 %
Vykurovacia technika Sanitárna flexi-ohybná hadica (9x13)  - 1/2"FF; 40cm
9,07 € –19 % 7,26 € / Cái 5,90 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Saniteettinen joustava letku - taipuisa (9 x 13), IVAR.150204, koko: 1/2" FF, pituus: 40 cm, pakkaus: 10 kpl
 
  • PN 10, T = +90 °C
  • teräslanka-vuoraus, mukaan lukien tiiviste
  • kierre sisäinen - sisäinen 1/2" FF
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen laippa/venttiili? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laippa/venttiili toimii? Tarkka toiminnan periaate (sulkeminen, paineen säätö, takaisinkulku jne.) riippuu tietystä tyypistä - yksityiskohtainen kuvauks toiminta löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalousmestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä ovat turvallisuustoiminnot.

Các thông số bổ sung

Danh mục hàng: FF 1/2"
Bảo hành: 2 năm
Trọng lượng: 0.108 kg
Kierteen koko: 1/2"
Pituus: 31 – 50 cm
Letkun tyyppi: joustava sanitaarisletku
Liitäntätyyppi: sisäkierre
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:04:33

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 12.11.2026 13:30
Zdravím, kupujem túto flexi hadicu na pripojenie umývadla, ale neviem, či tá 40cm dĺžka a ten rozmer 1/2" FF budú sedieť na moje staré potrubie, keďže som laiek v tom. Je to bezpečné použiť aj pri teplejšej vode?
A avatar của tác giả 12.11.2026 13:30
Ahoj, táto hadica má presne rozmer 1/2" FF a je určená pre teplotu až +90 °C, takže by mala vyhovovať bežným sanitárnym inštaláciám. Materiál opletenia je nerez a je atestovaná na pitnú vodu, takže je to spoľahlivá voľba. Ak si nie si istý meraním, odporúčame skontrolovať, či sa rozmery zhodujú s vašimi armatúrami.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.