Eshop roka 2025 s vykurovacou technikou

Saniteettijoustoletku (9x13) - 3/8"FM; 30cm IVAR.150101

Mã số: 15010130
Chưa được đánh giá Chi tiết đánh giá
7,40 € –20 %
Vykurovacia technika Sanitárna flexi-ohybná hadica (9x13)  - 3/8"FM; 30cm
7,40 € –20 % 5,92 € / Cái 4,81 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Saniteettijoustoletku - taipuisa (9 x 13), IVAR.150101, koko: 3/8" FM, pituus: 30 cm, pakkaus: 25 kpl
 
  • PN 10, T = +90 °C
  • punos ruostumaton teräs, sisältää tiivisteen
  • kierre sisäkierre - ulkokierre 3/8" FM
  • juomavesihyväksyntä, RÚVZ Poprad

Usein kysytyt kysymykset

  • Miten valitsen oikean tyypin ja koon varusteelle/venttiilille? Noudata teknisissä tiedoissa ilmoitettua nimellispainetta (PN) ja käyttölämpötilaa (T) – niiden on vastattava järjestelmäsi todellisia käyttöolosuhteita tai ylitettävä ne, ja liitännän koon on vastattava putken halkaisijaa.
  • Miten tämä varuste/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, vastavirtauksen esto jne.) riippuu tarkasta tyypistä – yksityiskohtaisen toimintakuvauksen löydät tämän tuotteen kohdalta edeltä.
  • Pitääkö asennuksen tehdä ammattilaisen? Yksinkertaisten sulkuventtiilien asennuksen osaa myös kodin remontoija, mutta säätö- ja turvaventtiilien (varoventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska ne ovat turvatoiminnolla varustettuja osia.

Các thông số bổ sung

Danh mục hàng: FM 3/8"
Bảo hành: 2 năm
Trọng lượng: 0.084 kg
Kierteen koko: 3/8"
Pituus: enintään 30 cm
Letkun tyyppi: joustava sanitaarisletku
Liitäntätyyppi: sisäkierre × ulkokierre
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:07:20

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

Š avatar của tác giả 25.10.2026 14:28
Ahoj, kupujem túto hadicu na umývadlo a chcem sa istiť, že to 3/8" FM sedí na štandardný kohútik a či vydrží horúcu vodu do 90 stupňov?
A avatar của tác giả 25.10.2026 14:28
Áno, táto hadica má presne závit 3/8" FM a je určená pre teploty až +90 °C, takže by mala sedieť aj na bežné prípojky. Opletenie je z nerezovej ocele a je certifikovaná na pitnú vodu, takže je bezpečná na použitie vo vašom systéme.
M avatar của tác giả 26.08.2026 10:09
I am planning to connect a bathroom faucet fitting with a 3/8" female thread on the supply valve side, and I would like to confirm whether this flexible hose with the 3/8" FM specification is suitable for that application, and whether the 30 cm length is measured as the overall length including the connectors or only the flexible tube itself.
A avatar của tác giả 26.08.2026 10:09
Yes, this hose is designed exactly for that kind of connection — 3/8" female thread on both ends, so it fits standard supply valves and faucet tails without any adapters. The 30 cm refers to the overall length of the hose including the end fittings, which is the standard way these are measured. If 30 cm turns out to be too short or too long for your setup, we also carry these flexible hoses in other lengths, so it's worth checking the range.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.