Eshop roka 2025 s vykurovacou technikou

Redukcia - 2"x6/4" IVAR.1581 G

Mã số: 1581G000908
Chưa được đánh giá Chi tiết đánh giá
18,45 € –20 %
Vykurovacia technika Redukcia - 2"x6/4"
18,45 € –20 % 14,76 € / Cái 12 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Redukti, IVAR.1581 G, koko: 2" x 6/4", pakkaus: 4 kpl pussiin / 64 kpl laatikossa

 

  • PN 10, T = +120 °C
  • materiaali messinki CW617N
  • ATEST juomavedelle (RÚVZ Poprad)

Usein kysyttyä

  • Miten valitsen oikean kokoisen liittimen? Kierrerungon koon on vastattava täsmälleen putken tai varusteen kierrerunkoa, johon liitin kiinnitetään - lyhenteet FF (sisäkierre-sisäkierre) ja MF (ulkokierre-sisäkierre) nimessä ilmoittavat kierteen tyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kierteitetyissä liitoksissa käytetään tavallisesti teflonnauhaa tai hamppukangasta tiivistyspastaa käyttäen varmistamaan liitoksen täydellinen tiiveys.
  • Onko asennus ammattilaisen tehtävä? Perusosaaminen riittää kotityöläiselle yksinkertaisten kierteitettujen liitosten tekemiseen, mutta jos joudutaan tekemään toimivaan järjestelmään (erityisesti kaasujärjestelmään), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: Sovittimet
Bảo hành: 2 năm
Trọng lượng: 0.1 kg
Liittimen tyyppi: supistus
Kierteen koko: 6/4", 2"
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:03:19

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 27.07.2026 04:03
Chcem prepojiť 2" výstup z kotla so 6/4" rozvodom vykurovania – bude táto redukcia 2"x6/4" vhodná priamo na toto prepojenie, alebo potrebujem nejaký medzikus?
A avatar của tác giả 27.07.2026 04:03
Áno, redukcia 2"x6/4" je určená presne na priame prepojenie týchto dvoch rozmerov závitového potrubia, takže medzikus nie je potrebný. Dôležité je skontrolovať, či máte na oboch stranách vonkajší alebo vnútorný závit, pretože redukcie môžu byť v rôznych kombináciách (vonkajší/vnútorný). Odporúčame pred montážou závity dôkladne očistiť a použiť tesniacu pásku alebo konopné tesnenie s pastou pre spoľahlivé utesnenie spoja. Pri inštalácii na vykurovací systém dbajte aj na správny smer montáže podľa toku média. V prípade akýchkoľvek pochybností o kompatibilite s konkrétnym kotlom nás neváhajte kontaktovať s typom zariadenia.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.