Eshop roka 2025 s vykurovacou technikou

Putkikiinnityspanta - 14-22 mm; halkaisija 4-6 mm IVAR.CLIP

Mã số: CLIP17F3
Chưa được đánh giá Chi tiết đánh giá
0,25 € –20 %
Vykurovacia technika Fixačný strmeň potrubia - 14-22mm; pr. 4-6mm
0,25 € –20 % 0,20 € / Cái 0,16 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Putkikiinnityspuristin - 16-17 mm; halkaisija 2-3 mm

  • lattalämmityksen putkien kiinnittämiseen kipsiverkkoruudukkoon
  • putken ulkohalkaisija 17 ja 20 mm, kipsiverkkoruudukon lanka Ø 2 - Ø 3 mm
  • putken ulkohalkaisija 25 mm, kipsiverkkoruudukon lanka Ø 3 - Ø 6 mm
  • materiaali muovi

Usein kysyttyä

  • Miten voin varmistaa, että tuote sopii järjestelmääni? Vertaa kuvauksessa mainittuja mittoja, materiaalia ja teknisiä ominaisuuksia järjestelmäsi vaatimuksiin. Epäselvyyksissä ota meihin yhteyttä ja kuvaile järjestelmäsi yksityiskohtaisesti.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaisempien osien asennus onnistuu myös taitavalta kotityöläiseltä, mutta kaasu-, sähkö- tai painejohtojen kanssa suosittelemme aina ammattimaisen asentajan apua.

Các thông số bổ sung

Danh mục hàng: lisävarusteet
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 23.09.2025 12:39:16

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

K avatar của tác giả 28.10.2026 09:33
Üdvözlöm,
K avatar của tác giả 28.10.2026 14:12
Tudna segíteni benne, linket küldeni, hogy hol tudok beszerezni hozzá szerelőszerszámot ? Roman Krajčí ezt írta (időpont: 2026. okt. 28., Sze, 9:33):
A avatar của tác giả 28.10.2026 14:12
Tisztelt Kállai Úr! Az IVAR.CLIP rögzítő bilincsekhez (CLIP17F3, 14–22 mm) a gyártó szerelőszerszáma az IVAR.TACKER CLIP (cikkszám: IVATAC42040). A gyártó kifutó termékként árusítja, ezért a webáruházunkban nem szerepel, de meg tudjuk rendelni Önnek. Ár: 586,23 € (ÁFA-val). Fizetés előre, díjbekérő alapján. A szállítás a befizetéstől számítva kb. 4–7 nap, amíg a gyártónál készleten van. Ha meg szeretné rendelni, kérjük, válaszoljon erre az e-mailre, és küldje el a számlázási és szállítási adatait.
A avatar của tác giả 28.10.2026 09:33
Tisztelt Kállai Úr! Igen, a gyártó (IVAR) az IVAR.CLIP rögzítő bilincsekhez külön szerelőszerszámot kínál, IVAR.TACKER CLIP néven. Ez egy speciális rögzítő pisztoly a clipek felhelyezéséhez a háló (kari háló) vagy a sík szigetelőlap fölé, így a clipeket nem kell kézzel, lehajolva beletenni. A webáruházunkban jelenleg csak az IVAR.TACKER szerszám szerepel, de az a PPA50 rögzítő kapcsokhoz való, a szigetelőlapba lövéshez. Az IVAR.CLIP bilincsekhez nem alkalmas, ezért azt nem javaslom.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.